Sharp GX22 User Manual page 55

Retaking Pictures
After steps 1 to 4 in "Taking Pictures" on page 53, press
C [Cancel].
Further shooting is available.
Note
• The digital camera uses a CCD sensor. Although this
camera has been manufactured to the highest
specifications, some pictures may still appear too
bright or too dark.
• If the phone has been left in a warm place for a long
time before taking or registering a picture, the
picture quality may be poor.
In the Case of No Available Memory
When the number of pictures that can be taken becomes
3 or less, the remaining shots indicator in the upper left
of the screen turns red. (The number of pictures that can
be taken is approximate.)
When the number of pictures that can be taken becomes
0, and when you try to take a picture again, "Memory
full. You cannot take a picture!" is displayed.
Meanings of Indicators in Digital Camera Mode
Remaining shots indicator
123: Indicates the remaining number of pictures
that can be taken.
Flash light indicators (p. 59)
Indicates when the flash light is turned on.
: Normal mode
: Macro mode
Delay timer indicator (p. 57)
: Indicates when Timer is set.
Continuous shooting indicators (p. 57)
:
When pictures are taken in continuous shoot-
ing mode, these indicators appear on the
screen.
Picture size indicators (p. 54)
Large:
Medium (default): 240 × 320 dots
Small:
480 × 640 dots
120 × 160 dots
Camera 55