Sharp GX22 User Manual page 138

Checking the Total Call Cost
1.
Press or to highlight "All Calls" in step 5 in
"Checking the Cost of the Last Call" on page 137,
then press to select.
When you have finished, press C [Back].
2.
Setting the Charge Rate
Set the charge rate to calculate the call cost and set the
maximum limit for call cost.
1.
Perform steps 1 to 4 in "Checking the Cost of the
Last Call" on page 137.
2.
Press or to highlight "Cost Units", then
press to select.
3.
Press or to highlight "Set Units", then press
to select.
4.
Enter your PIN2 code, then press
5.
Enter a cost per unit, then press
To enter a decimal point, press R.
6.
Enter a currency unit (up to 3 characters), then press
.
138 Call Manager
Checking the Charge Rate
1.
2.
Setting the Charge Limit
This function is useful if you wish to make sure you do
not exceed a certain charge limit.
1.
2.
3.
.
4.
.
5.
Press or to highlight "Read Units", then
press to select in step 3 in "Setting the Charge
Rate".
The charge rate is now displayed.
When you have finished, press C [Back].
Perform steps 1 to 4 in "Checking the Cost of the
Last Call" on page 137.
Press or to highlight "Max Cost", then press
to select.
Press or to highlight "Set Limit", then press
to select.
Enter your PIN2 code, then press
Enter a value, then press
To enter a decimal point, press R.
.
.