Sharp GX22 User Manual page 99

Setting the Tone and Strength
1.
Perform steps 1 to 4 in "Playing Back Sounds" on
page 98.
2.
Press or to highlight the file name you wish
to edit, then press A [Options].
The Options menu is displayed.
3.
Press or to highlight "Set Tone" or "Set
Strength", then press
For full details, see pages 114 to 116.
Note
• If "Set Tone" and "Set Strength" are not displayed
in the menu in step 2, you cannot change these
settings.
Sending Messages
1.
Perform steps 1 to 4 in "Playing Back Sounds" on
page 98.
2.
Press or to highlight the file name you wish
to send, then press A [Options].
The Options menu is displayed.
3.
Press or to highlight "Send Message", then
or A [Select] to select.
press
If you select your original ringtone in step 2, perform
the following, otherwise go to step 5.
or A [Select] to select.
4.
Press or to highlight the file format
"SMAF", "MIDI" or "i Melody", then press
select.
5.
Enter your message.
For details on creating a message, see "Creating a
New MMS" on page 65.
Note
• Sounds with a red icon cannot be sent attached to a
message.
• Only the first part of the data is converted if you
select "i Melody" in step 4.
Deleting Sounds
1.
Perform steps 1 to 4 in "Playing Back Sounds" on
page 98.
2.
Press or to highlight the file name you wish
to delete, then press A [Options].
The Options menu is displayed.
3.
Press or to highlight "Delete", then press
or A [Select] to select.
4.
Press or to highlight "One Sound" or "All
Sounds", then press
press A [Yes].
5.
To cancel deletion, press C [No] in step 5.
to select.
Gallery
to
99