Sharp GX22 User Manual page 93

To Add a Frame to Pictures
1.
Perform steps 1 to 4 in "Using Images as
Wallpaper" on page 91.
2.
Press or to highlight the file name you wish
to add frame to, then press A [Options].
The Options menu is displayed.
3.
Press or to highlight "Edit Picture", then
or A [Select] to select.
press
4.
Press or to highlight "Add Frame", then
press to select.
5.
Press or to highlight the frame pattern you
wish to use, then press
The selected frame is confirmed on the display.
6.
Press .
Note
• The size of pictures that you can add a frame to is 240
dots [W] × 320 dots [H] or 320 dots [W] × 240 dots
[H] maximum.
to select.
To Add Stamps to Pictures
1.
Perform steps 1 to 4 in "Using Images as
Wallpaper" on page 91.
2.
Press or to highlight the file name you wish
to add stamp to, then press A [Options].
The Options menu is displayed.
3.
Press or to highlight "Edit Picture", then
or A [Select] to select.
press
4.
Press or to highlight "Add Stamps", then
press to select.
5. Press A [Stamps], then press
the stamp pattern you wish to use, then press
select.
6.
Press , , or
point you wish to add a stamp.
7.
Press to add the stamp.
To add more stamps, repeat steps 5 to 7.
Press C [End], then press A [Yes].
8.
To cancel, press C [No] in step 8.
Note
• The size of pictures that you can add stamps to is 24
× 24 pixels minimum and 240 dots [W] × 320 dots
[H] or 320 dots [W] × 240 dots [H] maximum.
or to highlight
to
to move the cursor to the
Gallery 93