Table of Contents
Advertisement
setup
-
INT : Internal Synchronization Type
-
LL : Power Synchronization Type, Line-lock
Press the Function Setup switch.
You can select a desired phase from 0 to 359 when select 'phase'.
When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the LL type
M
synchronization.
When the power is DC 12V, the SYNC menu is fixed to the 'INT' mode.
INTellIGeNCe: Commands the camera to motion-detect and trace an object.
-
MOTION : Select motion types to detect.
-
OFF : Not being used.
-
DETECTION : Since the camera
-
TRACKING : Commands the camera to
▶FENCE :
You can select up to 4 FENCE.
▶MODE : Determines whether to use
▶TYPE : Two types, line and area, of
▶COUNT : Displays the number of times that an object enters or leaves a
▶FILL : Fill or remove color from the FENCE.
▶POSITION : Defines the position and detection direction of a line or
1) LINE FENCE
- SEL POS : Selects a position from POS1,POS2.
- X POS / Y POS : Adjust the size and position of the selected line fence.
30_ setup
detects motion without
any additional external
sensor, you can monitor
activity more efficient.
detect and trace a moving
object.
the fence selected in the
FENCE.
fences are available.
fenced area.
fenced area.
INTELLIGENCE
▶ 1.MOTION
2.DETECT BOX
3.ALARM OUT
4.DETECT AREA
5.MASK AREA
6.SENSITIVITY
IIIIIIII
7.DET.SIZE
IIIIIIII
8.RETURN
TRACKING
▶ 1.FENCE
2.MODE
3.TYPE
4.COUNT
5.FILL
6.POSITION
7.RETURN
OFF
ON
OFF
III IIIIIIIIII
3
III IIIIIIIIII
3
FENCE1
OFF
LINE
OFF
OFF
Advertisement
Table of Contents
