Table of Contents
Advertisement
ReTURN : Select this to save the changes in the EXPOSURE menu and return to
the SETUP menu.
If you set the Function Setup switch to 'AUTO' mode, You can adjust the brightness by increasing
M
or decreasing the limit value. (x2~x512)
Note that the higher the SENS-UP level, the brighter the screen, but the more likely it is that an
after-image will appear.
Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation when the
sens-up level is increased, this is normal.
ssDR
(samsung super Dynamic Range)
SSDR illuminates darker areas of an
while retaining the same light level for brighter
areas to even out the overall brightness of
images with high contrast between bright
and dark areas. Use the Function Setup
switch to change the SSDR level in the
sub menu according to the contrast
and dark areas.
between bright
SSDR ON
WHITe bAl (WHITe bAlANCe)
Use the White Balance function to adjust the screen color.
When the SETUP menu screen is displayed, select 'White Bal.' by using the
1.
Function Setup switch so that the arrow
indicates 'White Bal.'.
Select a desired mode using the Function
2.
Setup switch.
※ Select one of the following 5 modes, as
appropriate for your purpose.
image
▶ LEVEL
SSDR OFF
1.LENS
2.EXPOSURE
3.SSDR
WHITE BAL
▶
4.
SSDR SETUP
8
IIIIIIIII IIIIIIIIIIII
Press SET to Return
MAIN SETUP
DC
OFF
ATW
English_21
Advertisement
Table of Contents
