Table of Contents
Advertisement
setup
eXpOsURe
When the SETUP menu screen is displayed,
1.
select EXPOSURE by using the Function
Setup switch so that the arrow indicates
'EXPOSURE'.
2.
Select a desired mode using the Function
Setup switch.
bRIGHTNess : Adjusts the video brightness.
sHUTTeR : You can select shutter mode.
ESC : Select this to control the shutter
-
-
MANUAL : You can control shutter speed manually.
-
A.FLK : Select this when you experience picture flicker, this happens when
-
---: Shutter speed is fixed at 1/60sec(1/50sec).
When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture may
M
become unstable if the camera faces a bright fluorescent light. Therefore, take care when choosing
the installation position.
When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
Set the shutter mode to --- if color rolling occurs.
AGC (AUTO GAIN CONTROl) : The higher the gain level, the brighter the screen
OFF : Deactivates the AGC function.
-
-
LOW : Allows automatic gain control from 5.3dB to 32dB.
HIGH : Allows automatic gain control from 5.3dB to 37dB.
-
seNs-Up : When it is night or dark, the
-
OFF : Deactivates the SENS-UP function.
-
AUTO : Activates the SENS-UP function.
20_ setup
speed automatically. If ESC is
selected, the shutter speed is
automatically controlled depend-
ing on the ambient illumination of the subject.
(NTSC MODEL : 1/60~1/120,000 sec, PAL MODEL : 1/50~1/120,000 sec)
there is a clash with the installed lighting frequency.
camera automatically detects the
light level and maintains a clear
picture if this mode is activated.
1.LENS
▶ 2.EXPOSURE
3.SSDR
▶ 1.BRIGHTNESS
2.SHUTTER
3.AGC
4.SENS-UP
5.RETURN
but the higher the noise.
▶ AUTO
MAIN SETUP
DC
EXPOSURE SETUP
IIIII IIIIIIIIIIIIIIII
HIGH
OFF
LIMIT
Press SET to Return
OFF
25
---
x2
Advertisement
Table of Contents
