Samsung SCV-3082 User Manual page 26

setup
- BURST MODE : You can turn on or off the burst signal on B/W mode.
DWELL TIME : You can select the duration time about changing the
-
- DURATION : You can select the brightness level at which the camera
Slow
※ Light levels are often site dependant.
eXTeRN: This mode allows you to apply a desired filter to external signals.

COlOR: The picture is always displayed in color.

b/W: The picture is always displayed in black and white.

You can turn on or off the burst signal on B/W mode.
M
When AGC in the EXPOSURE menu is 'OFF', '---' mode operates as selecting 'COLOR' mode and
'AUTO' mode cannot be selected.
Be sure to connect the Day & Night input terminal to GND when using an external input.
The OSD key does not work for 3 seconds when switching to Color or B/W, to ensure stable
camera operation.
2_ setup
▶1.BURST MODE
2.COLORB/W
DURATION
DWELL TIME
3.B/WCOLOR
DURATION
DWELL TIME
4.RETURN
day/night mode.
→3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
switches from day to night mode.
Fast
AUTO SETUP
FAST
5 SEC
FAST
10 SEC
Color → B/W
2.5 lux
1 lux
ON
B/W → Color
5 lux
7 lux