Samsung SCV-3082 User Manual page 22

setup
ATW : Select this when the color temperature is between 1,700°K and 11,000°K.

OUTDOOR : Select this when the color temperature is between 1,700°K and

INDOOR : Select this when the color temperature is between 4,500°K and 8,500°K.

mANUAl : Select this to fine-tune White

AWC→seT : To find the optimal luminance level for the current environment,

M
White Balance may not work properly under the following conditions. In this case select the AWC
mode.
1 When the color temperature of the environment surrounding the subject is out of
the control range (e.g. clear sky or sunset).
2 When the ambient illumination of the subject is dim.
➌ If the camera is directed towards a fluorescent light or is installed in a
place where illumination changes dramatically, the White Balance
operation may become unstable.
BACKLIGHT
This camera is designed so that it delivers a distinctive subject and background at
the same time, even when the subject is in backlight, unlike conventional cameras, by
adopting a proprietary SV-V DSP chip.
1. When the SETUP menu screen is displayed,
select 'BACKLIGHT' by using the Function
Setup switch so that the arrow indicates
BACKLIGHT .
2. Select a desired mode using the Function Setup
switch depending on the camera purpose.
22_ setup
11,000°K.(sodium light inclusion)
Select this When the color temperature of environment surrounding
the subject is out of the control range (e.g. clear sky, or sunset)
Balance manually. Set White
Balance first by using the ATW
or AWC mode. After that switch
to MANUAL mode, fine-tune the
White Balance and then press the
Function Setup switch.
point the camera towards a sheet of white paper and press the
Function Setup switch. If the environment changes, readjust it.
WB MANUAL
▶ RED GAIN IIIIIIIIIIIIII  IIIIIIIIIIIIII
BLUE GAIN IIIIIIIIIIIIII  IIIIIIIIIIIIII
Press SET to Return
MAIN SETUP
1.LENS
2.EXPOSURE
3.SSDR
4.WHITE BAL
▶ 5.BACKLIGHT
235
245
DC
OFF
ATW
OFF