Dell
See the Back-Panel Features and Indicators section in the About Your System chapter of the PowerEdge R415
Hardware Owner's Manual on
3.5 Power Supply Indicators
The PowerEdge R415 power supplies (redundant and non-redundant) have one status bi-color LED: green for
AC power present and amber for a fault.
See the Power Indicator Codes section in the About Your System chapter of the PowerEdge R415 Hardware
Owner's Manual on
Support.Dell.com
3.6 NIC Indicators
See the NIC Indicator Codes section in the About Your System chapter of the PowerEdge R415 Hardware
Owner's Manual on
Support.Dell.com
3.7 Side Views
Side views of the PowerEdge R415 are shown in Figure 7 and Figure 8.
PowerEdge R415 Technical Guide
Back View (Redundant Power Supply)
Figure 6.
Support.Dell.com
Table 3.
LED
Power Supply Status
AC Power is not present
AC Power is present
Fault of any kind is detected
DC Power is applied to the system
Redundant power supply mismatch
↔
(when hot-plugged/swapped)
for more information.
for more information.
Figure 7.
Figure 8.
for more information.
Power Supply Status
Left Side View
Right Side View
16