Power Supply Indicators; Nic Indicators; Rails And Cable Management; Fans - Dell PowerEdge T310 Technical Manual

Dell

4.3 Power Supply Indicators

The PowerEdge T310 non-redundant cabled power supply or optional redundant power supply has one
status bi-color (green and amber) LED as detailed in Table 3.
See the Power Indicator Codes section in the About Your System chapter of the PowerEdge T310
Hardware Owner's Manual on

4.4 NIC Indicators

See the NIC Indicator Codes section in the About Your System chapter of the PowerEdge T310
Hardware Owner's Manual on

4.5 Rails and Cable Management

The PowerEdge T310 is not a rackable system and does not have a rack kit. However, the T310 can
be stored in a rack using a third-party rack tray.
For information on power-cord cable-management, see the Installation and Configuration section in
the Dell PowerEdge T310 Getting Started Guide on Support.Dell.com/Manuals.

4.6 Fans

The PowerEdge T310 has one cabled system fan on the back of the system. The fan is not
hot-plug component.

4.7 Control Panel

The PowerEdge T310 is available with an LCD control panel (hot-plug hard drive chassis) or an LED
control panel (cabled hard drive chassis).
PowerEdge T310 Technical Guide
Table 3.

Power Supply Status

LED Power Supply Status
AC Power is not present
AC Power is present
Fault of any kind is detected
DC Power is applied to the system
Redundant power supply mismatch
↔
(when hot-plugged/swapped)
Support.Dell.com/Manuals
Support.Dell.com/Manuals
for more information.
for more information.
15