The Clamp Meter - Fluke 305 User Manual

Clamp Meter
Safety Information
Carefully read all instructions.
Hold the Product behind the tactile barrier. See The Clamp Meter,
item .
Do not use test leads if they are damaged. Examine the test leads
for damaged insulation or exposed metal. Check test lead
continuity.
Do not measure current while the test leads are in the input jacks.
Do not use the Product around explosive gas, vapor, or in damp or
wet environments.
Limit operation to the specified measurement category, voltage, or
amperage ratings.
Do not work alone.
Do not apply more than the rated voltage, between the terminals or
between each terminal and earth ground.
Comply with local and national safety codes. Use personal
protective equipment (approved rubber gloves, face protection, and
flame-resistant clothes) to prevent shock and arc blast injury where
hazardous live conductors are exposed.
3