Enabling Dns; Smtp - Avaya Remote Supervisor Adapter User Manual

Enabling DNS

To enable the Domain Name System (DNS) and specify the DNS IP address:
1
In the navigation pane, select Network Protocols under the ASM Control heading.
The Simple Network Management Protocol (SNMP) window appears.
2
Scroll down to the DNS section.
3
In the DNS
will be used.
4
In the DNS server IP address 1, 2, and 3
DNS server IP addresses once the
0 through 255, separated by periods.
5
Scroll to the bottom of the page and click Save.
NOTE:
You must restart the ASM to activate the Network Protocols changes.
6
To restart the ASM, select Restart ASM under the ASM Control heading in the navigation pane.

SMTP

This section must be completed if a SMTP server is being used.
1
In the navigation pane, select
2
SMTP Server Host Name or IP Address field [no default]: If a DNS server is being used, type
the hostname of the SMTP Server. If a DNS server is not being used, type the IP Address
associated with the SMTP server.
3
Scroll to the bottom of the page and click Save.
Avaya Remote Supervisor Adapter User Guide
June 2004
field [default: Disabled]: Select Enabled from the drop-down menu if a DNS server
DNS
Network Protocols under the ASM Control heading.
Using the Avaya Remote Supervisor Adapter
fields [default: 0.0.0.0]: You can specify up to three
field is Enabled. Each IP address should contain integers
Alerts
49