Using the Avaya Remote Supervisor Adapter
Alerts
Configuring a remote alert recipient
You can define up to 12 unique remote alert recipients. Each link for an alert recipient is labeled with the
recipient name, notification method, and alert status.
To configure or view a remote alert recipient:
•
Select Alerts in the navigation pane.
The Remote Alert Recipient window displays the name, selected notification method, and status
of enabled or disabled. You can configure a maximum of 12 alert recipients.
Adding a remote alert recipient
To add a remote alert recipient:
1
In the Remote Alert Recipients section, click not used in an unused position of the next
available slot.
A new screen opens with the following configuration fields.
•
Receives Critical Alerts Only
for critical alerts. To view what constitutes a critical alert, select Alerts in the navigation pane and
scroll down to Monitored Alerts.
•
Status
: Click on the drop-down menu and select Enabled to activate this remote alert recipient.
•
Name
: Type the name of the alert recipient.
•
Notification Method
to reach the recipient. Methods include:
•
Numeric Pager
•
Alphanumeric pager
•
IBM Director over Modem: In the case where an Avaya service contract is in place or the
system is under warranty, this option could be used to report alarms to an Avaya service
center.
•
IBM Director over LAN - Avaya recommends not using this option.
32
: If this box is checked, the alert recipient receives notification only
: Use the drop-down menu to select the notification method that will be used
Avaya Remote Supervisor Adapter User Guide
June 2004