Troubleshooting - La Crosse Technology WS-7391U Instruction Manual

Troubleshooting

Problem:
Solution:
Problem:
Solution:
Problem:
Solution:
Problem:
Solution:
Problem:
Solution:
NOTE: For problems not solved, please contact La Crosse
Technology.
No reception of WWVB time signal
1) Wait overnight for signal.
2) Be sure indoor weather station is at least 6 feet
from any electrical devices, such as televisions,
computers, or other radio-controlled clocks.
3) Remove batteries for five minutes, reinsert and
leave alone without pressing buttons overnight.
4) If there are still problems, contact La Crosse
Technology
Hour is incorrect (minute and date are correct)
Be sure correct time zone and daylight saving time
are selected.
The LCD is faint
1) Set the LCD contrast to a higher number
2) Replace batteries
No remote temperature is displayed
1) Remove all batteries, reinsert into remote
sensor(s) first, then indoor weather station.
2) Place remote sensor(s) closer to indoor weather
station.
3) Be sure all batteries are fresh.
Remote humidity displays "- -"
1) A temperature only sensor is being used and
displayed
2) The humidity is outside the range of 19-95%
22