Settings; Riding Distance For Estimated Time Of Arrival Function And Automatic Lap Recording Settings (Cycling Set) - Polar Electro CS200 User Manual

Hide thumbs Also See for CS200:

Table of Contents

5. SETTINGS

Press MIDDLE

• Cycling SET

Press RIGHT

• Timer SET

Press RIGHT

• Limits SET

Press RIGHT

• Bike SET

Press RIGHT

• Watch SET

Press RIGHT

• User SET

Press RIGHT

• General SET

You can view or change the settings in the Settings menu.

Tip: Settings can also be conﬁ gured using the Polar UpLink Tool™. They can then be transferred to your

cycling computer from your PC. For further information, see page 55.

To set values:

• Adjust or select a value with the RIGHT button.

• Accept your selection and proceed in the menu with the MIDDLE button.

• Cancel your selection or return to the previous mode or menu by pressing the LEFT button.

5.1 RIDING DISTANCE FOR ESTIMATED TIME OF ARRIVAL FUNCTION AND

AUTOMATIC LAP RECORDING SETTINGS (CYCLING SET)

In the cycling settings you can make two different settings:

• RideDist: Setting riding distance.

Set the distance you are going to ride and the cycling computer will estimate your arrival time

to the destination according to your riding speed.

• AutoLap: Automatic lap recording.

Set the distance for the automatic lap and the cycling computer will record the lap

information every time you reach this distance. For example, if you set 1 km/m,

the cycling computer will record lap information every kilometer or mile.

ENGLISH

–

Table of Contents