Basic Settings - Polar Electro CS600X User Manual

Polar CS600X User Manual
Method 2
Measure the wheel manually for the most accurate result.
Use the valve to mark the point where the wheel touches the ground. Draw a line on the ground to
mark that point. Move your bike forward on a flat surface for one complete rotation. The tire should be
perpendicular to the ground. Draw another line on the ground at the valve to mark a full rotation.
Measure the distance between the two lines.
Subtract 4 mm to account for your weight on the bike to get your wheel circumference. Enter this
value in the cycling computer.

Basic Settings

Before using your cycling computer for the first time, customize the basic settings. Enter as accurate
data as possible to ensure correct feedback based on your performance.
To adjust the data, use UP, DOWN and accept with OK. The values scroll faster if you press and hold
UP or DOWN.
1. To activate your cycling computer, press OK twice. Once activated, it cannot be switched off!
2. The Polar logo will appear. Press OK.
3. : Select
Language English
4. is displayed. Press OK.
Start with bike settings
5. Number of bikes: Select 1, 2 or 3 depending on how many bicycles you will be using. If you only
use one bicycle, settings for bikes 2 or 3 bikes can be entered later. For further information see
Bike Settings.
6. : Enter the wheel size
Wheel
Wheel Size.
7.
Start with basic settings
8. : Select or
Time 12h 24h
9. : Enter current date; dd = day, mm = month, yy = year. If you use 12 h time mode, set the
Date
date; mm = month, dd = day, yy = year.
10. : Select metric
Units (kg/cm/km)
11. : Enter your weight. To change units, press and hold the LIGHT.
Weight
12. : Enter your height. In LB/FT format, first enter feet then inches.
Height
13. : Enter your date of birth; dd=day, mm=month, yy=year
Birthday
14. : Select or
Sex Male Female
15. is displayed. Select
Settings OK?
computer will display time of day. Select
Press STOP to return to the data you want to change.
, , ,
Deutsch Español Français
for each of your bicycles. For further information, see Measuring
(mm)
is displayed. Press OK and adjust the following data:
. With , select or
12h AM PM
or imperial
(lb/ft/mi)
.
or . Select
Yes No
if settings are incorrect and need to be changed.
No
or . Press OK.
Italiano
. Enter the local time.
units.
to accept and save settings. The cycling
Yes
7