Selecting The Print Quality - OKIDATA ML320 User Manual

Selecting the Print Quality

Important!
Front panel settings for print quality and character pitch
are overridden by software commands. The lights will
always reflect the printer's state.
PRINT QUALITY
Press to select:
PRINT QUALITY
NLQ: Near Letter Quality
• Highest quality, slowest speed
• Courier or Gothic fonts
• Recommended for correspondence
UTL: Utility
• Medium quality, medium speed
• Gothic font only
• Recommended for internal documents and
high-volume data.
UTL
HSD
NLQ
SSD
HSD: High Speed Draft
• Lower quality, faster speed
• Gothic font only
• Recommended for drafts.
SSD: Super Speed Draft
• Lowest quality (12 cpi only), fastest speed
• Gothic font only
• Recommended for fastest output of drafts.
Using Super Speed Draft
To use Super Speed Draft (SSD), enter the Menu Mode
and make changes as follows:
1. Press + .
SHIFT SEL
2. Press twice.
GROUP
3. Press until DRAFT prints as the setting for the
SET
Print Mode.
4. Press .
ITEM
5. Press (SSD prints).
SET
6. Press + to exit Menu Mode and save your
SHIFT SEL
changes.
Using Your Printer E-21