Part Names And Functions; Front Panel - Marantz SA-14S1 Owner's Manual

Peripheral circuitry off function minimizes audio
output signal interference
In order to minimize noise from peripheral circuitry which
could interfere with the analog audio signal, this unit is
equipped with a peripheral circuitry off function which turns
off the digital output circuit, the display, and the illumination
lamp.
Filter switching function
Switching between 2 types of filter characteristics is
possible during playback in the Super Audio CD and CD/DAC
modes, allowing the listener to enjoy different shadings of
the music.
Headphone circuit component upgrade
The high-grade headphone circuit incorporates HDAM®SA2
amplifier to enable headphone listening of high quality
sound reproduction, late at night or in other such situations.
iPod auto detect charges your device even after
this unit switches to standby mode
Auto Standby mode for energy savings
Features

Part names and functions

Front panel

Disc tray open/close button (5)
q
Opens and closes the disc tray (vpage 14).
Fast forwarding/Forward-skip button (7/9)
w
Plays the next track. Press and hold to fast-forward the
track (vpage 14, 18, 19).
Fast reversing/Reverse-skip button (8/6)
e
Returns to the start of the currently playing track. Press and
hold to fast-reverse the track (vpage 14, 18, 19).
USB port
r
Used to connect USB storages (such as USB memory
devices) and the USB cable supplied with iPod
(vpage 10).
Input source select button (DISC/INPUT)
t
This selects the input source (vpage 13).
Power operation button (X)
y
This turns the power on/off (vpage 13).
Headphones jack (PHONES)
u
Used to connect headphones.
Headphone volume control knob (LEVEL)
i
Adjusts the headphone volume.
NOTE
To prevent hearing loss, do not raise the volume level
excessively when using headphones.
Q2 Q8 Q7 Q6 Q5 Q4
q w e r t y u
Pause button (3)
o
Pauses playback (vpage 14, 18, 19).
Stop button (2)
Q0
Stops playback (vpage 14, 18, 19).
Play button (1)
Q1
Starts playback (vpage 14, 18, 19).
Illumination lamp
Q2
The illumination lamp lights (blue).
Disc tray
Q3
Used to insert a disc (vpage 14).
Display
Q4
This displays various pieces of information (vpage 5).
Remote control sensor
Q5
This receives signals from the remote control unit
(vpage 2).
STANDBY indicator
Q6
This is lit as follows according to the power status.
(vpage 13) :
• Power on : Off
• Standby : Red
• iPod charge standby : Orange
• Power off: Off
Multi layer indicator (MULTI)
Q7
This indicator lights up when the Multi channel area of a
Super Audio CD is selected (vpage 13).
DISPLAY OFF indicator
Q8
This indicator lights up when the display is turned off
(vpage 15).
ENGLISH
Q3 Q2
i o Q0 Q1
4