L2Tp/Pptp Server Advanced Settings - D-Link NetDefend DFL-210 User Manual
Network security firewall
Hide thumbs
Also See for NetDefend DFL-210:
- User manual (495 pages) ,
- Log reference manual (476 pages) ,
- Cli reference manual (213 pages)
Table of Contents
Advertisement
9.5.3. L2TP/PPTP Server advanced
settings
Web Interface
1.
Go to Rules > IP Rules > Add > IPRule
2.
Enter a name for the rule, for example AllowL2TP
3.
Now enter:
•
Action: Allow
•
Service: all_services
•
Source Interface: l2tp_tunnel
•
Source Network: l2tp_pool
•
Destination Interface: any
•
Destination Network: all-nets
4.
Click OK
5.
Go to Rules > IP Rules > Add > IPRule
6.
Enter a name for the rule, for example NATL2TP
7.
Now enter:
•
Action: NAT
•
Service: all_services
•
Source Interface: l2tp_tunnel
•
Source Network: l2tp_pool
•
Destination Interface: any
•
Destination Network: all-nets
8.
Click OK
9.5.3. L2TP/PPTP Server advanced settings
The following L2TP/PPTP server advanced settings are available to the administrator:
L2TP Before Rules
Pass L2TP traffic sent to the D-Link Firewall directly to the L2TP Server without consulting the
rule set.
Default: Enabled
PPTP Before Rules
Pass PPTP traffic sent to the D-Link Firewall directly to the PPTP Server without consulting the
rule set.
Default: Enabled
Max PPP Resends
The maximum number of PPP layer resends.
DestinationInterface=any DestinationNetwork=all-nets name=NATL2TP
368
Chapter 9. VPN
- Quick Links:
- The Cli
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
