Algs; Overview; Deploying An Alg - D-Link NetDefend DFL-210 User Manual

6.2. ALGs

6.2. ALGs

6.2.1. Overview

To complement low-level packet filtering, which only inspects packet headers in protocols such as
IP, TCP, UDP, and ICMP, D-Link Firewalls provide Application Layer Gateways (ALGs) which
provide filtering at the higher application OSI level.
An ALG object acts as a mediator in accessing commonly used Internet applications outside the
protected network, for example web access, file transfer and multimedia transfer. ALGs provide
higher security than packet filtering since they are capable of scrutinizing all traffic for a specific
protocol and perform checks at the higher levels of the TCP/IP stack.
ALGs exist for the following protocols in NetDefendOS:
• HTTP
• FTP
• TFTP
• SMTP
• POP3
• SIP
• H.323
• TLS

Deploying an ALG

Once a new ALG object is defined by the administrator, it is brought into use by first associating it
with a Service object and then associating that Service with an IP rule in the NetDefendOS IP rule
set.
Figure 6.1. Deploying an ALG
196
Chapter 6. Security Mechanisms