D-Link NetDefend DFL-210 User Manual page 61

2.4.1. SNMP Advanced Settings
Chapter 2. Management and Maintenance
Default: Enabled
SNMP Request Limit
Maximum number of SNMP requests that will be processed each second by NetDefendOS. Should
SNMP requests exceed this rate then the excess requests will be ignored by NetDefendOS.
Default: 100
System Contact
The contact person for the managed node.
Default: N/A
System Name
The name for the managed node.
Default: N/A
System Location
The physical location of the node.
Default: N/A
Interface Description (SNMP)
What to display in the SNMP MIB-II ifDescr variables.
Default: Name
Interface Alias
What to display in the SNMP ifMIB ifAlias variables.
Default: Hardware
61