Send Data Using Bluetooth Connectivity; Pair Devices - Nokia N92-1 User Manual

Hide thumbs Also See for N92-1:
Table of Contents

Advertisement

Do not pair with or accept connection requests from an
unknown device. In this way, you can better protect your
device from harmful content.

Send data using Bluetooth connectivity

Several Bluetooth connections can be active at a time. For
example, if you are connected to a compatible headset,
you can also transfer files to another compatible device at
the same time.
Bluetooth connectivity indicators
• When
is shown in the standby mode, Bluetooth
connectivity is on.
• When
is blinking, your device is trying to connect
with another device.
• When
is shown continuously, data is being
transmitted using Bluetooth connectivity.
Tip! To send text using Bluetooth connectivity, open
Notes, write the text, and select
Bluetooth.
1
Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open Gallery.
2
Select the item and
Options
Devices with Bluetooth technology within range start
to appear on the display.
Options
>
Send
>
Via
>
Send
>
Via
Bluetooth.
Device icons are
computer,
video device, and
other device.
To interrupt the search, select Stop.
3
Select the device with which you want to connect.
4
If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See 'Pair devices', p. 85.
5
When the connection has been established,
data
is shown.
The
Sent
folder in
Messag.
using Bluetooth connectivity.
Tip! When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter the code
*#2820# in the standby mode.

Pair devices

To open the paired devices view (
application main view, press
During pairing, a passcode is needed. Before pairing, agree
with the owner of the other device on the passcode (1-16
digits), and use the same code on both devices. Devices
that do not have a user interface have a factory-set
passcode. The passcode is used only once.
To pair with a device, select
device. Devices with wireless Bluetooth technology within
phone,
audio or
Sending
does not store messages sent
), in the
Bluetooth
.
Options
>
New paired
85

Advertisement

Table of Contents
loading

This manual is also suitable for:

N92Rm-100

Table of Contents