Table of Contents
Advertisement
category to which you want to add the landmark, and
press the scroll key to select it.
To send one or several landmark to a compatible device,
select
Options
> Send. Your received landmarks are
placed in the
Inbox
Navigator
Press
, and select
designed to provide route guidance information to a
selected destination, position information about your
current location, and traveling information, such as the
approximate distance to the destination and approximate
duration of travel.
To use
Navigator
connected to a compatible GPS receiver. The GPS receiver
must receive position information from at least three
satellites to calculate the coordinates of your location.
Route guidance
To use route guidance, scroll to Navigation, and press
Start the route guidance outdoors. If started indoors, the
GPS receiver may not receive the necessary information
from the satellites.
78
folder in Messaging.
My own
> Navigator.
Navigator
as a navigation aid, your device must be
Route guidance uses a rotating compass on the device
display. A red ball shows the direction to the destination,
and the approximate distance to it is shown inside the
compass ring.
Route guidance is designed to show the straightest route
and the shortest distance to the destination, measured in
a straight line. Any obstacles on the route, such as
buildings and natural obstacles, are ignored. Differences in
altitude are not taken into account when calculating the
distance. Route guidance is active only when you move.
is
To set your trip destination, select
destination, and select a landmark or waypoint as the
destination, or enter the latitude and longitude
coordinates. Select
Stop navigation
destination set for your trip.
Retrieve position information
To view the position information of your current location,
connect your device to a compatible GPS receiver, scroll to
Position, and press
location to the accuracy of meters. An estimate of the
accuracy of the location is shown on the display.
.
To save your current location as a waypoint or landmark,
select
Options
>
Save
that you can save and use in
are saved locations with more information, and they can
Options
>
Set
to clear the
. The GPS receiver can calculate its
position. Waypoints are locations
only. Landmarks
Navigator
Advertisement
Table of Contents
