Wlan Wizard - Nokia N92-1 User Manual

you have selected a secured WLAN network, you must
define the access point yourself in the connection
settings.
When an application asks you to select an access point,
select the created access point.
A wireless LAN connection is established when you create
a data connection using a wireless LAN internet access
point. The active wireless LAN connection ends when you
end the data connection. To end the connection, see
'Connection manager', p. 91.
You can use wireless LAN during a voice call or when
packet data is active. You can only be connected to one
wireless LAN access point device at a time, but several
applications can use the same wireless LAN connection.
When you activate the
wireless LAN (if available). Remember to comply with any
applicable safety requirements when establishing and
using a wireless LAN connection.
Tip! To check the unique media access control (MAC)
address that identifies your device, enter
*#62209526# in the standby mode.
90
Offline profile, you can still use

WLAN wizard

The WLAN wizard helps you to connect to a wireless LAN
and manage your wireless LAN connections.
The WLAN wizard shows the status of your wireless LAN
connections in the active standby mode. To view the
available options, scroll to the row showing the status, and
press .
If the search finds wireless LANs, and for example,
network found is displayed, to automatically create an IAP
and start the web browser using this IAP, select the status,
the option Start Web browsing, and the network.
If you select a secured wireless LAN network, you are asked
to enter the relevant passcodes. To connect to a hidden
network, you must enter the correct network name (service
set identifier, SSID).
If you are connected to a wireless LAN, the IAP name is
displayed. To start the web browser using this IAP, select
the status and the option Continue Web
the connection in the wireless LAN, select the status and
the option Disconnect WLAN.
If wireless LAN scanning is off and you are not connected
to any wireless LAN, WLAN scanning off
set scanning on and search for available wireless LANs,
select the status WLAN scanning
WLAN
browsing. To end
is displayed. To
off.