Table of Contents
Advertisement
Tip! To create an internet access point in a wireless
LAN, press
, and select
>
Availab. WLAN
Options
To create a new access point, select
point. Select
Use default settings
access point settings, or
Use existing settings
existing access point as the basis for the new access point..
To edit the settings of an access point, select
Edit. Follow the instructions from your service provider
Connection
name—Enter a descriptive name for the
connection.
Data
bearer—Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined
or with a red asterisk. Other fields can be
left empty, unless you have been instructed otherwise by
your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data access points
Follow the instructions from your service provider.
name—You obtain the access point name
Access point
from your service provider.
Connect.
>
Conn. mgr.
>
>
Define access
point.
Options
>
New access
to use the default
to select an
>
Options
User
name—The user name may be needed to make a data
connection, and is usually provided by the service
provider.
Prompt
password—If you must enter the password every
time you log in to a server, or if you do not want to save
your password in the device, select Yes.
Password—A password may be needed to make a data
connection, and is usually provided by the service
provider.
Authentication—Select
Normal
Homepage—Depending on the access point you are
setting up, enter the web address or the address of the
multimedia messaging center.
Select
Options
>
Advanced settings
following settings:
Network
type—Select the internet protocol type to use:
IPv4
or IPv6. The other settings depend on the selected
network type.
Phone IP address
(for IPv4 only)—Enter the IP address of
your device.
DNS
address—In
Primary DNS
address of the primary DNS server. In
addr., enter the IP address of the secondary DNS server.
Contact your internet service provider to obtain these
addresses.
or Secure.
to change the
address, enter the IP
Secondary DNS
113
Advertisement
Table of Contents
