Headset; Memory Card - Nokia N92-1 User Manual

To cancel an alarm, select Clock
alarm.
Clock settings
To change the clock settings, select
Settings.
To change the time or date, select Time,
Date.
To change the clock shown in the standby mode, select
Clock type > Analogue or Digital.
To allow the mobile phone network to update the time,
date, and time zone information to your device (network
service), select Network operator time
To change the alarm tone, select
World clock
To open the world clock view, open Clock, and press
In the world clock view, you can view the time in different
cities.
To add cities to the list, select
add a maximum of 15 cities to the list.
To set your current city, scroll to a city, and select
Options > My current city. The city is displayed in the
clock main view, and the time in your device is changed
> Options > Remove
Clock > Options >
Time zone, or
> Auto-update.
Clock alarm tone.
Options > Add city. You can
according to the city selected. Check that the time is
correct and matches your time zone.

Headset

Connect a compatible headset to
the Pop-Port TM interface system
connector of your device.
Warning: When you use
the headset, your ability to hear
outside sounds may be affected.
Do not use the headset where it
can endanger your safety.

Memory card

You can use a compatible miniSD card
to save the memory on your device. You
can also back up information from your
.
device to the memory card.
Use only compatible miniSD memory cards approved by
Nokia for use with this device. Nokia uses approved
industry standards for memory cards, but some brands
may not be fully compatible with this device. Incompatible
cards may damage the card and the device and corrupt
data stored on the card.
17