Hellenbrand promate 6.0 Owner's Manual page 27

ITEM NO.
ORDER NO.
1 101414
2 101871
3 102131
4-5 101618
4-5 101619
5 102153
6 102406
7 101551
101552
101556
101559
101574
101577
101583
101588
101591
101593
101594
Systems are shipped without 3/4" nut for drain elbow (polytube instal-
lation only) and 5/8" polytube insert (polytube installation only).
See System Specifications DLFC on page 32, for correct DLFC
size for your unit.
ITEM NO.
ORDER NO.
1 101414
2 101635
2 101636
3* 101244
4* 101160
5* 102153
6* 102437
7* 102141
8* 102165
9 101599
101562
101564
101567
101568
101571
101578
101580
See System Specifications DLFC on page 32, for correct DLFC size for
your unit.
The nuts and caps are designed to be unscrewed or tightened by hand or
with the special plastic wrench. If necessary a pliers can be used to un-
screw the nut or cap. Do not use a pipe wrench to tighten or loosen nuts or
caps. Do not place screwdriver in slots on caps and/or tap with a hammer.
Do not use pipe dope or other sealants on threads. Teflon tape must be
used on threads of the 1" NPT connection and on the threads for the drain
line connection. Teflon tape is not necessary on the nut connection nor
caps because of o-rings seals.
27
Drain line - 3/4"
DESCRIPTION
Elbow Locking Clip
Polytube Insert, 5/8"
Nut 3/4" Drain Elbow
Drain Elb 3/4" Male Assy-Vent
Drain Elb 3/4" Male Assy-No Vent
O-ring 019
DLFC Retainer Assy.
DLFC 0.7 gpm for 3/4"
DLFC 1.0 gpm for 3/4"
DLFC 1.3 gpm for 3/4"
DLFC 1.7 gpm for 3/4"
DLFC 2.2 gpm for 3/4"
DLFC 2.7 gpm for 3/4"
DLFC 3.2 gpm for 3/4"
DLFC 4.2 gpm for 3/4"
DLFC 5.3 gpm for 3/4"
DLFC 6.5 gpm for 3/4"
DLFC 7.5 gpm for 3/4"
DESCRIPTION
Elbow Locking Clip
Drain Ftg, 1" Straight Assy-Vent optional
Drain Ftg, 1" Straight Assy-No Vent
Drain Ftg Body, 1"
Drain Ftg Adapter, 1"
O-ring 019
Split Ring
Nut, 1" QC
O-ring 215
DLFC 9.0 gpm for 1"
DLFC10.0 gpm for 1"
DLFC 11.0 gpm for 1"
DLFC 13.0 gpm for 1"
DLFC 15.0 gpm for 1"
DLFC 17.0 gpm for 1"
DLFC 20.0 gpm for 1"
DLFC 25.0 gpm for 1"
QTY.
1
Optional
Optional
Optional
1
1
1
1
One
DLFC
must
be used
if 3/4
fitting
is used
Drain line - 1"
QTY.
1
1
1
1
1
1
1
1
One
DLFC
must be
used if
1" fitting
is used
Figure 19











Figure 18