Oce im2330 Printing Manual page 369

Status
Printer Error Finisher Disconnected - Please Join Finisher to
Copier.
Hole Punch Jam in Finisher - Please Clear Hole
Punch
Staple Jam in Finisher - Please Clear Staple
Staple Jam in Lower Tray of Finisher - Please
Clear Staple
Toner Not Recognized - Please Check Toner
Finisher Lower Tray Full - Please Remove Paper
Mixed Sized Paper not Allowed - Please Check
Paper
Finisher Tray 1 Paper Full - Please Remove Paper. Remove paper from the Finisher Tray 1.
Finisher Tray 2 Paper Full - Please Remove Paper. Remove paper from the Finisher Tray 2.
Inner Tray Paper Full - Please Remove Paper.
Hole Punch Full in Finisher- Please Clear Hole
Punch.
Job Separator Upper Paper Full - Please Remove
Paper.
Job Separator Lower Paper Full - Please Remove
Paper.
Offset Tray Full - Please Remove Paper.
Printer Output Error - Please Contact Service
Technician.
Printer Input Error - Please Contact Service Tech-
nician.
Time for Slit Glass and Main Charger Cleaning -
Please Clean Slit Glass and Main Charger
Details Description
Join the Finisher to the copier stably.
Clear hole punches from the Finisher. Refer to the
Operator's Manual for Basic Function for
instruction.
Remove jammed staples from the Finisher. Refer
to the Operator's Manual for Basic Function for
instruction.
Remove jammed staples from the Saddle Stitch
Finisher. Refer to the Operator's Manual for
Basic Function for instruction.
Check and adjust the toner bottle.
Remove paper from the Lower Tray of Saddle
Stitch Finisher.
Check the paper.
Remove paper from the Inner Tray.
This error message is only displayed for
im4530 Series, im2830 Series,
cm4530 Series.
Dispose the punched paper bits. Refer to the
Operator's Manual for Basic Function for
instruction.
Remove paper form the Job Separator Upper Tray.
This error message is only displayed for
im4530 Series, im2830 Series,
.
Remove paper from the Job Separator Lower Tray.
This error message is only displayed for
im4530 Series, im2830 Series,
.
Remove paper from the Offset Tray.
This error message is only displayed for
im4530 Series, im2830 Series,
.
Contact your service representative.
Contact your service representative.
Contact your service representative.
This error message is only displayed for
earlier models.
Document Monitor Errors 367