Oce im2330 Printing Manual page 292

6 Printing from Macintosh
- Saddle Stitch (Portrait)/Saddle Stitch (Landscape) — Select this to staple double in
the center for a booklet to be printed. Select this only when booklet printing is performed.
This option cannot be selected if a finisher is not installed.
"Saddle Stitch (Portrait)/Saddle Stitch (Landscape)" can be selected only when the Sad-
dle Stitch Finisher is installed.
— DC (Department Code)
In the DC menu, you can specify your department code, if this equipment is enabled the depart-
ment codes. Before specifying the department code, you must check the Department Code
option in the Printing Modes menu. Then specify the department code in this menu.
1
2
3
4
5
How the equipment performs printing for an invalid department code print job, which no depart-
ment code or invalid department code is specified, varies depending on the Department Code
Enforcement setting that can be set from Printer Utility Administrator mode. When the Depart-
ment Code Enforcement is set to "ON", the invalid department code print job will be stored in the
invalid department code print job list without printing. When the Department Code Enforcement
is set to "Print", the invalid department code print job will be printed. When the Department
Code Enforcement is set to "Delete", the invalid department code print job will be deleted without
printing.
290 Printing from Application on Mac OS X 10.2.4 to Mac OS X 10.4.x