Electric Vehicle (Ev) Battery Assembly - Toyota RAV4 EV 2012 Electric Emergency Response Manual

Electric Vehicle (EV) Battery Assembly

The RAV4 EV features a high voltage Electric Vehicle (EV) battery
assembly that contains sealed Lithium-ion (Li-ion) battery cells.
EV Battery Assembly

The EV battery assembly is enclosed in a metal case and is rigidly mounted
under the floor. The metal case is isolated from high voltage.

The EV battery assembly consists of low voltage (3.6 Volt) Li-ion battery
cells connected in a series-parallel circuit to produce approximately 230 to
386 Volts. Each cell is non-spillable and contained in a sealed metal case.

The electrolyte used in the Li-ion battery cells is a flammable organic
electrolyte. The electrolyte is absorbed into the battery cell separator and
will not normally leak, even in a collision.
EV Battery Assembly
Battery assembly voltage
Number of Li-ion battery cells in the battery
Li-ion battery cell voltage
Li-ion battery cell dimensions
Diameter x Height
Li-ion cell weight
Li-ion battery assembly dimensions
Li-ion battery assembly weight
230 to 386 V
-
3.6 V
0.71 x 2.56 in.
(18 x 65 mm)
Approximately 0.1 lbs (46.5 g)
74 x 57 x 11 in.
(1876 x 1454 x 270 mm)
845 lbs (383.5 kg)
Components Powered by the EV Battery Assembly

Inverter

Power Cables

DC/DC Converter for 12 V
Auxiliary Battery
EV Battery Assembly Recovery

If recovery of the EV battery assembly is necessary, please contact:
United States: (800) 331-4331
Canada: (888) TOYOTA 8 [(888) 869-6828]
12
- -

A/C Compressor

Cabin Coolant Heater

Battery Coolant Heater
EV Battery Assembly