Electric Vehicle (Ev) Battery Assembly And Auxiliary Battery; Ev Battery Assembly; Components Powered By The Ev Battery Assembly - Toyota iQ EV Dismantling Manual

Electric Vehicle (EV) Battery Assembly and Auxiliary Battery

The iQ EV features a high voltage Electric Vehicle (EV) battery assembly that contains sealed
Lithium-ion (Li-ion) battery cells.

EV Battery Assembly

•
The EV battery assembly is enclosed in a case and is rigidly mounted under the floor. The case is
isolated from high voltage.
•
The EV battery assembly consists of 150 low voltage (3.7 Volt) Li-ion battery cells connected in
series-parallel to produce approximately 277.5 Volts. Each Li-ion battery cell is non-spillable and
sealed in a case.
•
The electrolyte used in the Li-ion battery cells is a flammable organic electrolyte. The electrolyte
is absorbed into the battery cell separator and will not normally leak, even in a collision.
Battery assembly voltage
Number of Li-ion battery cells in the battery
Li-ion battery cell voltage
Li-ion battery cell dimensions
Li-ion cell weight
Li-ion battery assembly dimensions
Li-ion battery assembly weight

Components Powered by the EV Battery Assembly

•
Electric Motor
•
Inverter/Converter
- DC-DC Converter for 12 Volt Auxiliary Battery
EV Battery Assembly
Length x Width x Height
Length x Width x Height
9
277.5 V
4.13 x 5.83 x 1.04 in.
(105 x 148 x 27 mm)
1.60 lbs (726 g)
48 x 53 x 13 in.
(1,226 x 1,355 x 335 mm)
485 lbs (220 kg)
•
Power Cables
•
A/C Compressor
150
3.7 V