Installing The Processor - TYAN S7040 User Manual

2.4 - Installing the Processor

Your brand new S7040, Only Intel
certified and supported with this motherboard. Check our website for latest
processor support.
NOTE:
TYAN/MiTAC is not liable for damage as a result of operating an
unsupported configuration.
Follow the steps below to install the processors and heat sinks.
Please note that the illustrations are based on a B2 (SKT1356) Socket which may
not look exactly like the motherboard you purchased. Therefore, the illustrations
should be held for your reference only.
NOTE:
If only one processor is installed, start with CPU0 first.
1.
Locate the CPU socket.
2.
Remove the PnP cap from the CPU socket.
http://www.tyan.com
http://www.TYAN.com
®
"Sandy Bridge EN series" processors are
34