TYAN S7040 User Manual page 109

Status Code
0xF3
0xF4
0xF5 – 0xF7
Recovery Error Codes
0xF8
0xF9
0xFA
0xFB – 0xFF
PEI Beep Codes
# of Beeps
Progress Codes
1
1
2
3
3
4
4
7
DXE Phase
Status Code
0x60
0x61
0x62
0x63
0x64
0x65
0x66
0x67
0x68
0x69
0x6A
0x6B
Description
Recovery firmware image is found.
Recovery firmware image is loaded.
Reserved for future AMI progress codes
Recovery PPI is not available.
Recovery capsule is not found.
Invalid recovery capsule
Reserved for future AMI error codes
Description
Memory not installed
Memory was installed twice (installPEIMemory routine in PEI Core
called twice).
Recovery started
DXEIPL was not found.
DXE Core Firmware Volume was not found.
Recovery failed
S3 Resume failed
Reset PPI is not available.
Description
DXE Core is started.
NVRAM initialization
Installation of the South Bridge Runtime Services
CPU DXE initialization is started.
CPU DXE initialization (CPU module specific)
CPU DXE initialization (CPU module specific)
CPU DXE initialization (CPU module specific)
CPU DXE initialization (CPU module specific)
PCI host bridge initialization
North Bridge DXE initialization is started.
North Bridge DXE SMM initialization is started.
North Bridge DXE initialization (North Bridge module specific)
109
http://www.TYAN.com