TYAN S8005 User Manual page 73

3.7.4 Onboard Peripherals Configuration
Use this section to enable or disable onboard devices.
Marvell 88SE6440 SAS
Enable or Disable Onboard Marvell SAS controller.
Watchdog Mode
Disabled: Disable Watchdog;
POST: BIOS POST Watchdog, timer counting starts at PowerOn, stops at OS
boot;
OS: Boot watchdog, starts at OS boot;
PowerOn: Start at PowerOn.
Chassis intrusion detection
Disabled: Disable Chassis intrusion detection;
Enabled: When a chassis open event is detected, the BIOS will record the
event and issue a warning beep.
73
http://www.tyan.com