TYAN S8005 User Manual page 15

JP4: Clear CMOS Jumper
3
1
Normal
(Default)
3
1
Clear
JP13: Chassis Intrusion Header
1
JP12: WDT Jumper
JP1: BMC Reset Jumper
Use this jumper when you forgot your system/setup
password or need to clear system BIOS setting.
How to clear the CMOS data
Power off system and disconnect power supply
-
from AC source
Use jumper cap to close Pin_2 and 3 for several
-
seconds to Clear CMOS
Replace jumper cap to close Pin_1 and 2
-
Reconnect power supply to AC source
Power on system
Pin 1
Signal Intruder#
Open: WDT RESET System (Default)
Closed: WDT Trigger NMI
Open: Normal (Default)
Closed: BMC RESET
http://www.tyan.com
The Chassis Intrusion Header
2
provides chassis intrusion-
monitoring function.
Note: For use with chassis
that support this feature.
GND
15