Table 11. Wake-Up Devices And Events - Intel DG45ID Technical Product Specification

1.12.1.2 Wake-up Devices and Events
Table 10 lists the devices or specific events that can wake the computer from specific
states.
Table 10. Wake-up Devices and Events
These devices/events can wake up the computer...
LAN
PME# signal
Power switch
RTC alarm
Serial port
USB
WAKE# signal
Consumer IR
Notes:
1. For LAN and PME# signal, S5 is disabled by default in the BIOS Setup program. Setting this option to
Power On will enable a wake-up event from LAN in the S5 state.
2. Wake from S4 and S5 is optional by the specification.
NOTE
The use of these wake-up events from an ACPI state requires an operating system
that provides full ACPI support. In addition, software, drivers, and peripherals must
fully support ACPI wake events.
Product Description
...from this state
(Note 1)
S1, S3, S4, S5
(Note 1)
S1, S3, S4, S5
S1, S3, S4, S5
S3, S4, S5
S3
S3
S1, S3, S4, S5
(Note 2)
S1, S3 (S4 and S5)
35