General Operation - Haier SAP-KRV9AV Instruction Manual

3. OPERATION OF WIRELESS REMOTE CONTROL UNIT

3.3 General Operation

NOTE
Press the setting buttons as described below and change the settings as desired.
STEP 1
STEP 2
STEP 3
STEP 4
NOTE
STEP 5
10
STEP 1
STEP 3
STEP 4
To start the air conditioner, press the ON/OFF operation button.
Press the MODE selector button and select the desired mode.
For DRY operation
For COOLING operation
For FAN only operation
For AUTO operation
For HEATING operation
Press the TEMP. setting buttons to change the temperature setting to the
desired temperature.
Adjustable temperature range:
30°C (86°F) max.—16°C (61°F) min.
In "AUTO" mode, the temperature cannot be adjusted.
In "HEAT" mode, the initial value is 28°C (82°F).
In other operation, the initial value is to 25°C (77°F).
Set the FAN SPEED selector button to the desired setting.
AUTO : Auto fan speed.
: Low fan speed.
: Middle fan speed.
: High fan speed.
In Dry mode, the fan speed is automatically set to LOW.
Press the button and set the air-blow direction, as desired or
automatically.
To STOP the air conditioner, press the ON/OFF operation button again.
STEP 2
STEP 5
(** Only for Heatpump models **)
(** Only for Heatpump models **)