Haier SAP-KRV9AV Instruction Manual page 9

3. OPERATION OF WIRELESS REMOTE CONTROL UNIT
3.2 Remote Control Unit Functions
ON/OFF operation button
TEMP. setting button
FAN SPEED Selector button
CLOCK button
BLOW button
TURBO button
SLEEP button
Transmitter
Display
ON/OFF operation button
MODE selector button
(AUTO)
(COOL)
(DRY)
(HEAT)
(+) / (-) setting buttons
LOCK / UNLOCK button
TIMER ON button
TIMER OFF button
8
Signal Transmitter
When you press the buttons on the remote control unit, the
appears in the display to transmit the setting changes to the receiver in the
air conditioner.
Information on the operating conditions is displayed while the remote control
unit is turned on. If the unit is turned o , only the current time and the
operation mode temperature that has been set are displayed.
This button is for turning the air conditioner ON and OFF.
To select "AUTO" "COOL" "DRY" "FAN" or "HEAT" mode.
: In this setting, the air conditioner calculates the di erence between the
thermostat setting and the room temperature and automatically
switches to appropriate running mode.
: The air conditioner makes the room cooler.
: The air conditioner reduces the humidity in the room.
(FAN) : The air conditioner runs the indoor fan only.
: The air conditioner makes the room warmer.
+
: Press the (+) button to increase the set temperature; continue pressing
for two seconds to quickly increase the set temperature.
: Press the (-) button to reduce the set temperature; continue pressing
for two seconds to quickly reduce the set temperature.
: Simultaneously press the
remote control unit.
ON : The air conditioner starts at the set time.
OFF : The air conditioner stops at the set time.
Display
MODE selector button
TEMP button
SWING button
TIMER ON button
TIMER OFF button
LIGHT button
mark
OPER
(** only for Heatpump models **)
+
b button to lock or unlock the wireless
OI-183-8-EG