Table of Contents
Advertisement
3. OPERATION OF WIRELESS REMOTE CONTROL UNIT
3.2 Remote Control Unit Functions (Continued)
FAN SPEED selector button
TEMP button
NOTE
BLOW button
LIGHT button
TURBO button
SLEEP button
CLOCK Button
SWING Button
NOTE
AUTO : The air conditioner automatically decides the fan speeds.
: Low fan speed.
: Medium fan speed.
: High fan speed.
AUTO
Press to see the set temperature or indoor temperature that are displayed on
the indicator lamp.
: Display the preset temperature.
: Display the indoor ambient temperature (5 seconds)
The ambient temperature will be displayed for 5 seconds,
following which the preset temperature will be displayed.
: Current displaying status will not be changed.
No Icon : Default display of preset temperature.
Press to start or stop indoor fan drying indoor components. This function is
applicable to "COOL" & "DRY" mode only. In "AUTO," and "FAN mode,
"BLOW" function is not ava ilable and "BLOW" is not displayed.
Press this button to turn ON/OFF indicator light display.
Press to quickly cool or heat the room with powerful cool or hot air.
For details, see "SLEEP MODE" (page 12). When you press this button in
the "DRY," "COOL" or "HEAT" mode, the
the remote control unit will automatically adjust the set temperature to save
energy.
Use this button to set the clock.
How it Works
Press the CLOCK button once if the
indication alone ashes. Within 5 seconds, press the +/– button. The time
can be set in 1-minute increments. Holding down the button advances the
time rapidly in 10-minut e increments. Press the CLOCK button again. The
is displayed, completing the setting of the current time.
Sets the air swing direction to change circularly as below:
OFF
When the guide louver begins swinging up and down, if swing is turned
o , the air guide louver will stop at the current position. (refer to page
14 for more details)
mark appears in the display and
indicator is not ashing. The
9
Advertisement
Table of Contents
