Haier SAP-KRV9AV Instruction Manual page 12

3. OPERATION OF WIRELESS REMOTE CONTROL UNIT
3.4 Using the 24-Hour "ON" or "OFF" Timer
3.4.1 TIMER ON
Mode
(Example)
ON
3.4.2 TIMER OFF
Mode
(Example)
OFF
After the length of time set for TIMER ON elapses, the unit begins
operating.
The display depicted at left indicates that the air conditioner will begin
operating in 10 hours.
Setting procedure:
STEP 1 Press the "ON/OFF" button and "MODE" button to set the
desired operation mode. (See "Operation with the Remote
Control Unit", page 8). Press the "ON/OFF" button again to
turn o the unit.
STEP 2 Press the "TIMER ON" button.
STEP 3 Press the "TIMER ON" button (which advances the clock
displayed) to set the time at which you want operation to
begin.
The time can be set for one-minute intervals for 24 hours.
Holding down the (+) / (-) button will rapidly change the time
value.
Press the "TIMER ON" button again to con rm the set time is
10 A.M.
• The display changes immediately to the current time, but ON indication
remains.
Cancellation procedure: Press the "TIMER ON" button again to cancel
After the length of time set for TIMER OFF elapses, the unit stops
operating.
The display depicted at left indicates that the air conditioner will stop
operating in 10 A.M.
Setting procedure:
STEP 1 Press the TIMER OFF button.
STEP 2 Press the "TIMER OFF" button (which advances the clock
displayed) to set the time at which you want operation to stop.
The time can be set for one-minute intervals for 24 hours.
Holding down the (+) / (-) button will rapidly change the time
value.
Press the "TIMER OFF" button again to con rm the o time is
10 A.M.
• The display changes immediately to the current time, but OFF indication
remains.
Cancellation procedure: Press the "TIMER OFF" button again.
11