Changing Communication Settings - EMS 1304 Installation And Operation Manual

Changing communication settings:

Press EDIT (ESC) button, Scroll down EDIT  to COM MENU, press ENTER, at COM PORT press
ENTER set to 1 for Modbus then press EDIT (ESC) button it will return to COM Port. (Note: controllers will
automatically choose Modbus when the RS 232 port is not in use.)
Press the EDIT  to go to Address press ENTER and use the EDIT down or up arrow to go to the address
number assigned to this controller (default is 1), press EDIT (ESC) to return to Address.
Continue as above until all settings are as desired.
+19999
MESSAGE
ACK DIS


AUTO
MAN
REM
LOC
PV SP OUT
 
(ESC)
EDIT EDIT
ENTER EDIT
17
"Edit
Value"
Light
"Scroll
Menu"
light
Moves
Message
Cursor
EDIT
Keys
Hinged
Cover