3
Settings
NOTE
You can enjoy only standard definition video with the following
connectors:
• Composite video connector
• SCART connector
• RF Modulator
3.7.3 Screen Format
The TV that you have connected to your set-top has an aspect ratio
(width-to-height ratio) of 4:3 (basic/standard) or 16:9 (widescreen).
You must set the appropriate TV Aspect Ratio on your set-top, so that it
is compatible with the TV.
Two settings are available: 4:3 and 16:9. You should set the TV Aspect
Ratio to 4:3 or 16:9 as appropriate. If you have a wide-screen television,
set the Screen Format option to 16:9. Otherwise, if you have a normal-
screen television, set the Screen Format option to 4:3. The default
setting is 4:3.
3.7.4 Display Format
If you set it to LetterBox option, wide-screen pictures then will be
reduced to fit to the width of the normal screen. Otherwise, set it to
FullScreen, then wide-screen pictures will be cut out on the left and
right sides equally to fit to the width of the normal screen. The default
60
Need help?
Do you have a question about the Elite and is the answer not in the manual?