Page 1: User Manual
Azbox Elite Azbox Premium User Manual High Definition Digital Satellite Receiver Personal Video Recorder...
Page 2 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. (a) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Page 3 water or moisture. (e) Do not place the receiver on an unstable cart, stand, tripod, bracket, or table. The receiver may fall, causing serious personal injury and damage to the receiver. (f) Do not block or cover slots and openings in the receiver. These are provided for ventilation and protection from overheating.
Page 4: Safety Precautions
the warranty. Refer all servicing to Authorized service personnel. (l) Unplug the receiver from the wall outlet and refer servicing to authorized service personnel whenever the following occurs: - The power supply cord or plug is damaged; - Liquid has been spilled, or objects have fallen into the receiver; - The receiver has been exposed to rain or water;...
Page 5 around it. For the physical specification of the digital receiver, see 6.1. ⑥ Protect the power cord from being walked on or pinched. If the cord is damaged, do not use the digital receiver and get the cord replaced. ⑦ Never open the digital receiver casing under any circumstances, or the warranty will be void.
Page 6: Table Of Contents
Contents Table of Contents Introduction ........................... 10 Features ..............................10 Package Contents ..........................12 1.2.1 Azbox Elite ............................12 1.2.2 Azbox Premium ..........................13 The front panel ............................14 1.3.1 Azbox Elite ............................14 1.3.2 Azbox Premium ..........................15 The Rear panel ............................17 1.4.1 Azbox Elite ............................17 1.4.2...
Page 7 System Information ..........................45 Language/Time settings ........................46 3.2.1 Menu Language ..........................47 3.2.2 Audio Language / Sub audio language ..................47 3.2.3 Subtitle language..........................48 Local time setting ..........................49 Timer ................................52 3.4.1 Timer Number ............................52 3.4.2 Timer State............................53 3.4.3 Timer Cycle............................53 3.4.4 Timer Service .............................53 3.4.5 Time..............................53 Internet ..............................54...
Page 8 3.8.5 SAT/TP Edit............................74 3.8.5.1 Add satellite (TP) ........................74 3.8.5.2 Delete Satellite (TP) ........................74 Parental control .............................75 3.9.1 Change password ..........................75 3.9.2 Menu lock feature..........................76 3.9.3 Age rating control / Age limit......................76 3.10 Data Reset ............................78 3.10.1 Factory setting ...........................78 3.10.2 Delete all channels ..........................79 3.10.3 Delete satellite channels........................79...
Page 9 Connect the computer to the digital receiver................113 5.2.1 Windows XP.............................114 Windows Vista ..........................114 5.2.2 Product specifications / Warranty................... 116 Product specifications ........................116 6.1.1 Power specifications........................116 6.1.1.1 Azbox Elite ..........................116 6.1.1.2 Azbox Premium ........................116 6.1.2 Physical specifications........................116 6.1.2.1 Azbox Elite ..........................116 6.1.2.2 Azbox Premium ........................117 Warranty ..............................118 6.2.1...
Page 10: Introduction
Introduction Introduction 1. Introduction The Azbox Elite/Premium HD digital receiver is fully compliant with the international Digital Video Broadcasting(DVB) standard, and thus is able to receive digital broadcasts of that standard. For its operation you need an antenna, which must be installed appropriately.
Page 11 60 hours of television —in case of 250 gigabytes— in excellent picture and sound quality. ⑨ Time shift is a special technical feature available on the Azbox Elite (PVR Ready) /Premium (PVR). You can pause the program you are watching and resume it again at a later time.
Page 12: Package Contents
Introduction 1.2 Package Contents Before going any further, check that you have received the following items with your digital receiver. 1.2.1 Azbox Elite • Azbox Elite • Remote control unit • Two batteries for the remote control (AAA 1.5V) • One power cable...
Page 13: Azbox Premium
Introduction 1.2.2 Azbox Premium • Azbox Premium • Remote control unit • Two batteries for the remote control (AAA 1.5V) • One power adaptor • One power cable • One SATA cable • User Guide CD • Four Screw bolts NOTE Accessories may vary according to your local area.
Page 14: The Front Panel
Introduction 1.3 The front panel The front panel of the Azbox Elite/Premium has buttons to perform basic functions such as changing channels, adjusting volume, and powering on and off. And specific LEDs and a display to indicate its status. The following indicates what they mean.
Page 15: Azbox Premium
⑥ CHANNEL /∨ buttons: Switch to previous or next service. They are also used to navigate around menu screens. ⑦ OK button: Determine your selection or to display channel selection. 1.3.2 Azbox Premium ① One SMART CARD Slot: Support electronic commerce using a smart card.
Page 16 Introduction REC LED: LED when you are recording a program. HD Channel LED: Green LED when receiving a HD(High Definition) program. ⑤ Power button: Switch the digital receiver between stand-by mode and operation mode. To reboot the receiver, press this button for 3 seconds.
Page 17: The Rear Panel
Introduction 1.4 The Rear panel The Azbox Elite/Premium has a wide range of connections on the back. Check what connections your television set has in comparison with the digital receiver. The following indicates what they mean. 1.4.1 Azbox Elite ① POWER SWITCH: Turn the digital receiver On and OFF.
Page 18 Introduction ⑧ Y/Cb/Cr: Component video output socket for the television set. (green/blue/red) ⑨ VIDEO: Composite video output socket for the television set. (yellow) ⑩ AUDIO L/R: Stereo audio output socket for the television set or the audio system. (white/red) ⑪ ANT IN: Connect with TV RF antenna. ⑫...
Page 19: Azbox Premium
Introduction 1.4.2 Azbox Premium ① POWER SWITCH: Turn the digital receiver On and OFF. ② AC POWER INPUT: Connect AC power cord to deliver power to the digital receiver. ③ HDMI: Audio and video output socket for the high definition television set.
Page 20 Introduction ⑪ ANT IN: Connect with TV RF antenna. ⑫ TV OUT: Connect with RF feed. ⑬ SCART TV: Audio and video output socket for the television set. ⑭ LNB OUT: Satellite broadcasting signal output socket. ⑮ LNB IN: Satellite broadcasting signal input socket. Table 1.4: Connectors specifications HDMI High definition video output...
Page 21: The Remote Control
Introduction 1.5 The remote control 1.5.1 Azbox Elite...
Page 22 Introduction Power ( ): Put the STB into standby or operation mode. To reboot the receiver, press this button for 3 seconds. MUTE ( ): Mute the sound. Press again to switch it back. NUMMERIC BUTTONS (0 ~ 9): Input channel numbers, passwords, on-screen keyboard and to set time.
Page 23 Introduction Press twice to display more information about a program. TV/RADIO ( ): Switch between TV services and radio services. RESOLUTION ( ): Change aspect ratio. See § 3.5.1 for more details. SEARCH ( ): Search internet address (Only use in YouTube and Browser Menu) AUX ( ): Switch to antenna/cable bypass input signal.
Page 24: Azbox Premium
Introduction 1.5.2 Azbox Premium...
Page 25 Introduction Numbers from 1 to 5 are for TV control buttons. TV/AUX ( ): Switch to antenna/cable bypass input signal. TV VOL +/- ( ): Increase or decrease TV volume. TV CH / ( ): Change the channels up and down. TV Power ( ): Turn TV on and off.
Page 26 Introduction REC ( ): Support basic operation for On-Screen Display MUTE ( ): Mute the sound. Press again to switch it back. MENU ( ): Display the Detail Menu. CHECK ( ): Check the selected option. GUIDE ( ): Display the EPG(Eletronic Program Guide). EXIT ( ): Exit menus, EPG(Eletronic Program Guide) and program information.
Page 27: Premium Model Rcu
Introduction UHF ( ): Display and select the UHF channel for the RF modulator. AUX ( ): Switch to antenna/cable bypass input signal. NUMERIC BUTTONS (0~9): Input channel numbers, passwords, on-screen keyboard and to set time. DEL/BACK ( ): Delete or move your cursor one step back. CAPS/NUM ( ): Switch the number buttons to lower, upper case letters or back to numbers.
Page 28: Tv Universal Configuration 2 (Auto Search)
Introduction 1.5.3.3 TV Universal configuration 2 (Auto search) ① Press TV/AUX( ) + OK( ) buttons for 3 seconds, then the TV Power( ) button will turns on. ② With the TV Power( ) button turns on, press the button until TV turns off. ③...
Page 29: Ci (Common Interface)
Introduction 1.6 CI (Common Interface) Some broadcasts are scrambled so that only paid subscribers can enjoy them. Scrambled services can only be viewed with a Conditional Access Module (CAM) and a subscription card belonging with the scrambling system. Common Interface (CI) is the slot on a digital receiver into which a conditional access module may be inserted.
Page 30 Introduction To view the information about the module and subscription card which is inserted into the digital receiver, press the Menu( ) button. You should see a screen like picture above.
Page 31: Installations
Installations 2. Installations There are several ways to set up the digital receiver. Set up the digital receiver suitably to your television and other appliances. If you have any problem with your setup or need help, contact your dealer. 2.1 Connections to antenna Whatever sort of connection you have between the digital receiver and the television, you need to connect the digital receiver to your television antenna so that it can receive digital television services.
Page 32: Connections To Tv
Installations 2.2 Connections to TV Between all the following connectors of the digital receiver, we recommend you to use the first connector to get best picture quality. If your television does not have the matching connector, then use the next connector in the following order for better picture quality.
Page 33: Hdmi Connector
Installations 2.2.1 HDMI connector If you have a high definition television set, you should use a HDMI cable for best results. Plug one end of the cable into the HDMI socket on the digital receiver, and plug the other end into the matching socket on your television.
Page 34: Scart Connector
Installations 2.2.2 SCART connector For best results with a standard television set, you should use a SCART cable. Plug one end of the cable into the TV socket on the digital receiver, and plug the other end into a free SCART socket on your television.
Page 35: Component Video Connector
Installations 2.2.3 Component video connector You need to obtain a component video cable(RCA cable) to use the component video connector. Plug one ends of the cable into the Y(green), Cb(blue) and Cr(red) sockets on the digital receiver, and plug the other ends into the matching sockets on your television.
Page 36: Composite Video Connector
Installations 2.2.4 Composite video connector You need to obtain a composite video cable(RCA cable) to use the composite video connector. Plug one end of the cable into the VIDEO(yellow) socket on the digital receiver, and plug the other end into the matching socket on your television. NOTE You cannot view high definition video with the composite video connector.
Page 37: Audio Connection
Installations 2.2.5 Audio connection You need to obtain an audio cable(RCA cable) to connect the audio connectors. Plug one end of the cable into the AUDIO L(white) and AUDIO R(red) sockets on the digital receiver, and plug the other end into the matching sockets on your television or audio system.
Page 38: Installing Batteries
Installations cable. Plug one end of the cable into the S/PDIF socket on the digital receiver, and plug the other end into the matching socket on your audio system. 2.3 Installing batteries To Install batteries in the remote control, perform the following steps: 1.
Page 39: Powering On For The First Time
Installations 2.4 Powering on for the first time [Azbox Elite] [Azbox Premium] Now that you have your digital receiver connected, you should plug it into a mains socket and turn on the Power Switch at the backside. The front panel indicator will be lit blue.
Page 40: Powering On And Checking Picture
Installations NOTE - Your receiver, as any electronic equipment, is power consuming. In order to reduce power consumption, please switch your receiver to standby whenever you are not using it. - For saving energy compared to the stand by mode, if you are not using your receiver for a longer period of time, we recommend to switch off the receiver by unplugging it from the mains.
Page 41: Firmware Update
Installations 2.5 Firmware Update The digital receiver has a stable and convenient firmware to use. However, once in a while a new firmware may be released to improve the digital receiver. 2.5.1 Checking the firmware information You have to check up the firmware information of your digital receiver before downloading a new firmware.
Page 42: Internet
Installations NOTE The version of firmware is always the latest version when you purchase the digital receiver. 2.5.1.1 Internet You can update the firmware through the Internet. Make sure that the digital receiver is connected to the internet before running the firmware upgrade.
Page 43: Usb Storage
If you have a USB memory stick, you can update the firmware from it by performing the following steps: ① Download a new firmware from the Azbox web site. ② Copy the firmware file to your USB memory stick. ③ Insert the USB memory stick into the USB port of the digital receiver.
Page 44 Installations NOTE Your USB memory must be formatted in the FAT file system. Otherwise, the digital receiver cannot recognize your USB memory. In addition, the digital receiver can only recognize files and directories which are named with only alphabetic, numeric and underscore letters. If there is a file or folder named with other letters, the digital receiver cannot recognize not only it but also its subsequent files and folders.
Page 45: Settings
3.1 System Information You can check the current information of the digital receiver from this menu; Firmware Version, Last upgrade, Resolution, MAC address, (Azbox Premium also shows MAC wireless address if you have), IP and Internet status.
Page 46: Language/Time Settings
Settings You can also upgrade your firmware version or download channels through the Internet, USB or Ethernet. To upgrade your firmware, see § 2.5. 3.2 Language/Time settings You can select the language in which the menu would be displayed. In addition to that, you can select the language of audio track and of subtitle track.
Page 47: Menu Language
Settings 3.2.1 Menu Language The digital receiver supports many Menu Languages: English, Portuguese, Dutch, Korean, and so forth. Set the Menu Language option to your desired language. Once you select a language, the menu will be immediately displayed in the selected language. The default setting is English.
Page 48: Subtitle Language
Settings 3.2.3 Subtitle language Set the Subtitle Language option to your desired language. When you watch a program, if the program has a subtitle track of the language that is designated for the Subtitle Language, it will be displayed. If there is not any available language, no subtitle will be displayed.
Page 49: Local Time Setting
Settings 3.3 Local time setting You should set your local time for timer events. If you do not set the local time correctly, the program time table provided by the program guide may be distrustful. For the program guide, see § 4.1.3.1. Select the Setting >...
Page 50 Settings Settings To use Greenwich Mean Time, take the following steps: ① Set the Time Offset option to the time difference between your time zone and GMT referring to Table 3.3. ② Make sure that your local time is correctly displayed on the Local Time option.
Page 51 GMT - 01:00 Azores, Cape Verde Islands London, Lisbon, Casablanca GMT + 1:00 Paris, Brussels, Copenhagen, Madrid GMT + 2:00 South Africa, Kaliningrad GMT + 3:00 Baghdad, Riyadh, Moscow, St. Petersburg GMT + 3:30 Tehran GMT + 4:00 Abu Dhabi, Muscat, Baku, Tbilisi GMT + 4:30 Kabul GMT + 5:00 Ekaterinburg, Islamabad, Karachi, Tashkent GMT + 5:30 Bombay, Calcutta, Madras, New Delhi...
Page 52: Timer
Settings 3.4 Timer With timers, you can turn your digital receiver on or off whenever you wish. Once you have set the timer, the receiver will operate automatically. Timer Menu allows you to select the timer number, state, cycle, service, and the operation time. 3.4.1 Timer Number The Maximum number of timers is 8.
Page 53: Timer State
Settings 3.4.2 Timer State You can choose the use of the selected timer. Each timer can be turned on or off. 3.4.3 Timer Cycle Each timer can be programmed to occur at various time intervals. There are four timer modes: One Time means literally ‘one time’...
Page 54: Internet
Settings 3.5 Internet 3.5.1 Network : Wi-Fi, Wired network. The default setting is Wired network. To use WIFI, you need to set Wi-Fi and press the OK( ) button. 3.5.2 IP Setting : Dynamic IP(DHCP), Static IP. The default setting is DHCP. DHCP: IP-subnet mask and Gateway are not used because the DHCP server assigns these parameters.
Page 55: Speed Check
Settings To apply DHCP, 1. In IP setting option, choose DHCP IP and press the OK( ) button. 2. Select the setup below to apply the configuration. Static IP: The system’s IP-address, IP-subnet mask and Gateway must be specified in the IP-address. To apply Static IP, 1.
Page 56: Storage
Settings 3.6 Storage 3.6.1 Device Device option shows the list of the devices(HDD or USB) which connected to your digital receiver. P(number) means the number of the device’s partition. To delete partition, press the Delete Partition( button.
Page 57: Partition
Settings 3.6.2 Partition Partition option shows the status of selected partition. 3.6.3 Partition Format To use the device with the digital receiver, you need to format it before using it. Delete all partitions of the device you want to use, and select Format with the OK( ) button.
Page 58: Video And Audio Settings
Settings 3.7 Video and audio settings You have to configure the video and audio settings appropriately for your television set and other appliances. Select the Setting > Audio/Video menu. You should see a screen like the left figure. The picture format for an HDTV is a combination of screen format and video resolution and is different for normal-screen and wide-screen HDTVs.
Page 59: Video Format
Settings 3.7.1 Video Format You can choose the video format: PAL or NTSC PAL for Europe and North America and NTSC models for North America. The default setting is PAL. 3.7.2 Video resolution Your receiver can transmit pictures to your TV in a range of resolutions. Generally, higher screen resolutions give better quality pictures.
Page 60: Screen Format
Settings NOTE You can enjoy only standard definition video with the following connectors: • Composite video connector • SCART connector • RF Modulator 3.7.3 Screen Format The TV that you have connected to your set-top has an aspect ratio (width-to-height ratio) of 4:3 (basic/standard) or 16:9 (widescreen). You must set the appropriate TV Aspect Ratio on your set-top, so that it is compatible with the TV.
Page 61: Video Output
Settings setting is FullScreen. 3.7.5 Video Output You can choose the video output: CVBS(composite) or RGB(component). The default setting is CVBS. 3.7.6 Default Audio Format You can choose the default audio format: AC3 or off. The default setting is Off. 3.7.7 Audio Output You can choose the audio output: Stereo, Left(Mono) or Right(Mono).
Page 62: Rf Channel Number
Settings Otherwise, set it to Compressed. The default setting is Uncompressed. NOTE If the service you are currently watching does not provide Dolby digital, you cannot watch the program with Dolby sound even though you set the Dolby Output option to Compressed. 3.7.9 RF Channel Number You can choose the RF channel number: 21 to 69.
Page 63: Tv Channel
Settings 3.8 TV Channel 3.8.1 Antenna Setup The Antenna Setup menu controls all the parameters for your installation. Ensure that your satellite receiver is correctly connected to your television and dish, and that your satellite signal is of good quality by checking the Strength and Quality meter.
Page 64: Satellite Name
Settings top of the menu. NOTE A minimum level of stable signal Quality is required to be able to search and view the channels. 3.8.1.1 Satellite Name 1. Select the satellite you want to program. Scroll through the various satellite using the Navigation( ) buttons and select the appropriate satellite by press the OK( ) button.
Page 65: Lnb Frequency
Settings 3.8.1.2 LNB Frequency To scan channels, you must select the correct LNB type that you have on your dish. The default value is for the Universal LNB. Select the proper LNB type using the buttons according to the LNB type you are using.
Page 66: Diseqc
Settings 3.8.1.3 DiSEqC 3.8.1.4 22KHZ Tone 22KHZ Tone option is set to OFF for each LNB type, but can be turned ON. If the LNB Frequency is set to Universal, you do not have to use this option. 3.8.1.5 0/12V Switch You can select the option between 0V and 12V.
Page 67: Tp Frequency
Settings 3.8.1.7 TP Frequency Select a specific transponder by using the buttons, or pressing the OK( ) button. to view the drop-down list. 3.8.1.8 Positioner Setup 3.8.1.8.1 DiSEqC 1.2 This mode will allow you to set the antenna position for each satellite. In order to use antenna positioner you must use a motor controlled by DiSEqC 1.2 commands.
Page 68 Settings the OK( ) button. To clear a saved satellite position, select satellite, then choose Resetting from the Command Mode and press the OK( button. Setting and enabling East and West limits that the dish can move to is done. Setting East Limit: Move the dish to the most eastern position and press the OK( ) button to store it.
Page 69 Settings 3.8.1.8.2 USALS This mode will allow you to use a DiSEqC 1.3/2.3 motor controlled by USALS(Universal Satellite Automatic Location System). The first time you select USALS, you must enter your location (longitude and latitude). You can also edit the satellite’s position. This will be necessary if you add a new satellite because it will be set to zero by default.
Page 70: Network Search
Settings 3.8.1.9 Network Search Some of the new transponders being broadcasted in the satellite could be missing in the given TP list. In this case, there is a good chance that the information of those new transponders are being sent through the given TP.
Page 71: Satellite Scan
Settings 3.8.2 Satellite Scan Satellite can be scanned directly from the Satellite Scan menu, Select Satellite Scan menu and press the OK( ) button. Scroll through the satellite dropdown list, and select a satellite by pressing the OK( ) button. When you press the OK( ) button to start process, you will be given four options in the search criteria: TV channels, Radio channels, FTA (Free-to-air) channels and Scrambled...
Page 72: Tp Scan
Settings Once you have selected the desired satellites, press the OK( ) button to start searching those satellites. The receiver will search all satellites selected with the Check( ) button. To save the searched channel list, press the OK( ) button. 3.8.3 TP Scan Individual transponders(TP) can be scanned with TP scan.
Page 73: Advanced Scan
Settings 3.8.4 Advanced Scan The channel search procedure can be performed in different ways. Start by selecting the satellite to be searched in the Advanced Scan menu. The TP frequency can be entered manually by using the Number buttons, or selected from the dropdown list that appears when you press the OK( ) button while highlighting the Frequency field.
Page 74: Sat/Tp Edit
Settings 1. PCR: Enter the PID(Packet Identifier) for the PCR(Program Clock Reference). 2. Video: Enter PID for the video signal. 3. Audio: Enter PID for the audio signal. 3.8.5 SAT/TP Edit In this menu, you can add/delete the satellites or transponders. 3.8.5.1 Add satellite (TP) Press the Add Satellite( ) button to add a new satellite(or TP) to the...
Page 75: Parental Control
Settings 3.9 Parental control In general, television programs are classified according to the level of violence, nudity and language of their content. You can prevent your children from watching specific programs by adjusting Parent control option. In parental control menu, you can set the censorship classification or change the password.
Page 76: Menu Lock Feature
Settings The default password is set to ‘0000’. To change the password, select the Change password menu; enter your previous password inside the white box and select Change. Then an input box appears. You can change the password to a desired number. If anyone is trying to watch a program that is of or above the censorship setting, the person has to enter the personal identification number to override.
Page 77 Settings When you are watching a program, you can check its program classification on the information box. NOTE If a program does not have any program classification information, your censorship setting will not take effect.
Page 78: Data Reset
Settings 3.10 Data Reset The digital receiver maintains the following data: • Satellite list • Services list • Favorite list • Timer list • Preference settings You can reset all data of the digital receiver. Before you enter the date reset option, you must input your password.
Page 79: Delete All Channels
Settings condition, select Factory setting. Then a warning message will be displayed. To confirm, select YES. All satellite and transponder lists will be set to the factory default. On selecting factory setting you will lose all of the data and information, which was previously installed. NOTE A factory reset will not delete any recorded programs.
Page 80: Gogo-List
Settings 3.11 GOGO-list Bandwidth All, C-Band, Ku-Band Satellite Name...
Page 81: Main Menu
Main Menu 4. Main Menu To open Main Menu, wherever you are, press the Home( ) button on your remote control.
Page 82: Watching Television
Main Menu 4.1 TV 4.1.1 Watching television 4.1.1.1 Changing Channels You can change channels in three ways: ① Press CH / on the front panel, or press CH / ( ) or on the remote control to change channels. ② Press the OK( ) button while using the channel selection.
Page 83: Channel Selection
Main Menu 4.1.2 Channel Selection To view the Channel Selection, press the OK( button. On the services list, you can see the service information: ① Service number and name ② Transmitting satellite ③ channel Information. ④ Transponder information To watch a desired channel, put the highlight bar on its entry with the Navigation buttons and press the OK( ) button, then it will be presented.
Page 84: How To Sort The Channels
Main Menu Main Menu the single EPG of the channel will be shown. See § 4.1.3.1.1 for more details. 4.1.2.1 How to sort the channels You can sort the channels; ALL, Satellite, Genre, Provider, Country, FTA/CAS, and FAV. ① ALL: show the all channels you can watch. ②...
Page 85 Main Menu The Favorite channel list (FAV) function is used to organize your channel list and create and edit your favorite channels. The Maximum number of FAV groups is 50. And 200 channels per each group. To select a favorite service, put the highlight bar on a desired group and press the OK( ) button;...
Page 86: Channel Edit
Main Menu 4.1.2.3 Channel Edit To edit the channel, press the Menu( ) button; Lock, Skip, Delete, Add to favorite, Insert HD flag, Rename, and MOVE. ① Lock: Lock channels. To watch the locked channel, you must enter your password. ②...
Page 87: Program Information
Main Menu highlight bar on a desired group and press the OK( ) button. ⑤ Insert HD flag: Insert the HD flag to channels. ⑥ Rename: Change the name of the highlighted service, See § 4.2.1 for how to use the on-screen keyboard. ⑦...
Page 88: Selecting Subtitle Lists
⑥ Dolby symbol( ) means a Dolby audio track is provided on the current program. When you are not using time-shift, if the EPG is provided on the current service, you can see the information about the current and next programs with the button.
Page 89: Viewing Teletext
Main Menu 4.1.2.6 Viewing Teletext The display of teletext is based on transmitted data using the EBU Teletext specification and DVB Bitmap and can only be viewed on a TV that supports teletext. If the current service provides teletext, the teletext symbol( ) will be displayed on the information box.
Page 90: Epg (Electronic Program Guide)
Main Menu 4.1.3 EPG (Electronic Program Guide)
Page 91: Epg (Electronic Program Guide)
Main Menu 4.1.3.1 EPG (Electronic Program Guide) The TV/Radio EPG(Electronic Program Guide) provides an overview of available TV and Radio channels, and programs the broadcasters have scheduled for now, next and beyond, depending on which program information they transmit. To display EPG, press the Guide( ) button on the remote control.
Page 92: Single Epg
4.1.4 PVR (Personal Video Recorder) NOTE Azbox Elite/Premium does not support the video cassette recording. Due to the Macrovision Copy Protection v.7.01, the recorded program can be distorted.
Page 93: Pvr
Main Menu 4.1.4.1 PVR 4.1.4.1.1. Internal HDD (Azbox Premium) HDD should be mounted manually. NOTE - The USB HDD that is formatted in NTFS file-system does not support all PVR functions. - The USB memory stick does not support buffering and recording...
Page 94: Record Live Tv
Main Menu 4.1.4.1.2 PVR Ready (USB) – (Azbox Elite/ Azbox Premium) NOTE - The USB HDD that is formatted in NTFS file-system does not support all PVR functions. - The USB memory stick does not support buffering and recording functions.
Page 95: Reserve Recordings Using The Epg
Main Menu Main Menu ③ Repeat: Once, Mon to Fri, Mon to Tue, Wed to Thu, Daily or User Select. If your favorite program is broadcast at every Monday and Tuesday and you wish to record every episode of the program, set this option to Mon to Tue. ④...
Page 96: Recording A Pay Service Program
Main Menu If the EPG is properly provided, you can make reserve events on it. The instructions on how to make reserve recordings using the EPG are as follows: ① Display the EPG in the Detail Menu. ② Select a service you want to record with the buttons.
Page 97: Recorded Program
Main Menu recording a pay program, it will be recorded without descrambling from that moment. Even if the recording is only partially descrambled, you need the subscription card to play it back. 4.1.4.6 Recorded Program When a program is recorded, it is stored as a file on the built-in hard disk drive of the digital receiver or USB memory stick.
Page 98 Main Menu and replay it. When you are watching a program and you miss something, you can rewind and replay it. Or when your attention is needed elsewhere, you can pause it and resume it a short time later without losing any of it. When you do this, you are no longer watching the live program, instead you are watching a delayed presentation of it.
Page 99 shift. It may cause disorder.
Page 100: Youtube
Main Menu 4.2 YouTube 4.2.1 How to search in the YouTube Press the Search( ) button. Enter search text in the box that appears and press the OK( ) button on the remote control. The system will list all entries that contain the entered letter combination. When accessing an input field where letters are required, the system automatically goes to letter mode.
Page 101 Change to lower, upper case letters or back to numbers with the CAP/NUM( ) button, and space with the button. NOTE How to write "Azbox 123" in the input field: Press the button once to change to upper case letters Press the button once to get an "A".
Page 102: Load Video Lists
Main Menu 4.2.2 Load Video Lists You can also search the UCC (User Created Contents) for your interest. Press the Menu( ) button and select Feed, Category, Time and Site. The default setting is [featured / all / all time / global]. When you press the Search( ) button on remote control, the receiver will show the list based on your preference.
Page 103: File Play & Management
Main Menu 4.3 File Play & Management There are two different ways to play video/audio/photo file from your device. • HDD: If HDD is connected to IDE inside the box, user may use this function to play local files in hard disk drive. •...
Page 104: Movie
Main Menu 4.3.1.1 Movie ① Set play mode: Play once or Repeat. ② Multi audio: Select Audio ③ Subtitle: Select Position, Size, View, Sync and Language. ④ Screen control: Brightness, Saturation, Contrast, Hue and Zoom. ⑤ Video setup: Full or Auto.
Page 105: Music
Main Menu 4.3.1.2 Music Set play mode: Standard play, Repeat, Repeat all or Random.
Page 106: Photo
Main Menu 4.3.1.3 Photo ① Image optimization: optimize the selected image. ② Start slideshow: Pictures will automatically slide in every 5 seconds. ③ My Album: Create your own album. ④ Arrange: You can arrange the images by its Name, Date or Size. ⑤...
Page 107: File Management
Main Menu 4.3.2 File Management In file management menu, you can not only play all supported files, but also create folder, rename or copy files. Folder option: Create folder, Rename and Arrange. File option: Copy, Cut and Paste.
Page 108: Move Files To Another Folder
Main Menu 4.3.2.1 Move files to another folder To copy, cut and paste files to another folder, perform the following steps: 1. Select files to copy or cut with the Check( ) button. 2. Press the Menu( ) button, and select the option you want to perform with the files.
Page 109: Rss News
Main Menu 4.4 RSS News RSS (Rich Site Summary) is a format for delivering regularly changing web content. Many news-related sites, weblogs and other online publishers syndicate their content as an RSS Feed to whoever wants it. RSS solves a problem for people who regularly use the web. It allows you to easily stay informed by retrieving the latest content from the sites you are interested in.
Page 110: Add New Category
Main Menu 4.4.1 Add new category To add a new category, take the following steps: 1. Press the Menu( ) button. Select the Add new category option, and press the OK( ) button. 2. Enter a new category name in the box that appears and press the ) button.
Page 111: Browser
Main Menu 4.5 Browser Select Browser on main menu, it will display the default page set in the box. If you want to change the default page, press the Set Home( button on the remote control. To surf different web page, you can move the cursor to the URL box, and type URL address.
Page 112 Main Menu 1. Select the FAV Add option. 2. Input the site address. See § 4.2.1 for how to use the on-screen keyboard. 3. Press the OK( ) button to save the site to your favorite list.
Page 113: Network
Network 5. Network You can connect the digital receiver to the computer. Then you can copy files to or play files through the network. Before you use the network, the Settings > Internet menu must be set. When you use a Wi-Fi, you should know whether you have a good connection.
Page 114: Windows Xp
Network 5.2.1 Windows XP ① Computer settings: When you place your mouse on the folder that you want to share and click the right mouse button, you pop up a limited menu of commands. Select the “Share and Security” option. ②...
Page 115 Network Network option, then the receiver will search for the network automatically. ⑩ If your receiver cannot find the network automatically, press the Menu( ) button and select the Edit IP Address option. You can input the computer IP address directly with the Number buttons.
Page 116: Product Specifications / Warranty
Product specifications / Warranty 6. Product specifications / Warranty 6.1 Product specifications 6.1.1 Power specifications 6.1.1.1 Azbox Elite Input voltage 110 to 240 VAC, 40Am (SMAPS) Power consumption 40W at maximum in operation 5W in standby 6.1.1.2 Azbox Premium Input voltage 11V, 3.4Am / 24V, 800m...
Page 117: Azbox Premium
Product specifications / Warranty 6.1.2.2 Azbox Premium Size 340 x 243 x 66mm Gross Weight (w/o HDD) 2.65 kg Gross Weight (with HDD) 3.04 kg Net Weight (w/o HDD) 2.11 kg Net Weight (with HDD) 2.49 kg Operating temperature 0 to 60 °C...
Page 118: Warranty
Product specifications / Warranty 6.2 Warranty 6.2.1 Warranty Terms and Conditions This warranty must be presented at an OpenSat authorized repair service station before any repair can be made under conditions of the warranty. This warranty is valid only if the Warranty Certificate and proof of purchase are presented at the OpenSat repair service station—...
Page 119 Product specifications / Warranty Product specifications / Warranty the customer may turn the product in at any OpenSat service station. Please note that such OpenSat Service Center do no exist in all countries. The customer shall transport the product to the dealer or OpenSat authorized service station at his own risk and shall be responsible for any costs incurred in transporting the product.
Page 120: Notes Regarding Warranty Maintenance
Product specifications / Warranty ⑨ When proof of purchase is not presented with this Warranty Certificate. This Warranty applies to the product only; the Warranty does not apply to any other accessory equipment, such as the Phone cable, Power cord and Phone splitter.
Page 121: Disclaimer Of Warranty
contained in it is incomplete or illegible. Since the Warranty Certificate will not be re-issued, keep it in a safe place. 6.2.4 Disclaimer of Warranty OpenSat makes no representations or warranties, either expressed or implied, by or concerning any content of these written materials or software, and in no case shall be liable for any impelled warranty purchase are all completed or the original invoice or the sales receipt of merchantability or fitness for any particular purpose or for any...
Page 122: Appendix
Appendix 7. Appendix << TV Brand List >> Brand Name Setting Number A.R.Systems 0037 0352 0556 0374 0455 Accent 0009 0037 0556 Acer 1339 Adcom 0625 1217 Admiral 0093 0363 0418 0163 0264 Adyson 0216 0037 0556 1556 0606 1163 Agashi 0216 0264...
Page 123 Appendix Akira 0418 Akito 0037 0556 Akura 0037 0556 0668 0412 0009 0218 0282 0264 0714 1982 Alaron 0216 Alba 0037 1037 0556 0714 0009 0418 0370 0371 0668 0355 0218 0216 0247 0163 0487 0036 1908 0443 1935 Alkos 0035 All-Tel 0865...
Page 124 Appendix Asberg 0037 0556 Asora 0009 Astra 0037 0556 Asuka 0218 0216 0264 0282 0698 Atlantic 0037 0556 0216 Atori 0009 Auchan 0163 Audiosonic 0009 0037 0374 0820 0556 0109 0714 0715 0370 0264 0218 0486 Audioton 0486 0370 0264 Audioworld 0698 Autovox...
Page 125 Appendix Bennett 0556 0037 BenQ 1756 Beon 0037 0556 0418 Berthen 0668 Best 0370 Bestar 0037 0556 0370 0374 Bestar-Daewoo 0374 BlackDiamond 1163 0820 1037 0556 0821 0753 BlackStar 0247 BlackStrip 0035 Blackway 0282 0218 Blaupunkt 0191 0535 0195 0200 0327 0328 0455...
Page 126 Appendix 0036 0037 0371 0282 0355 0363 0374 0519 0264 0361 1037 0487 0208 1556 1259 0698 0556 0714 1900 1908 0778 Canton 0218 Capsonic 0264 Carad 0610 0037 0556 0668 1037 Carena 0455 0037 0556 Carrefour 0036 0070 0037 0556 Carver 0170...
Page 127 Appendix 0037 0556 0370 0216 Condor 0009 0282 0247 0418 0411 0163 0264 Conia 0754 0821 0894 0820 Conrac 0808 Conrad 0037 0556 Contec 0216 0009 0011 0036 0264 0037 0556 ContinentalEdison 0109 0287 0487 Cosmel 0009 0037 0556 Crosley 0247 0074 0084...
Page 128 Appendix Dayton 1207 Daytron 0009 0374 0037 0556 deGraaf 0208 0163 0548 0363 0795 0860 0891 Decca 0516 0037 0556 1137 1908 Deitron 0037 0556 0374 0218 Denko 0264 Denver 0037 0556 0606 1189 0587 0193 Desmet 0037 0556 0009 Diamant 0037 0556...
Page 129 Elekta 0009 0037 0556 0264 0282 Elfunk 1208 1037 0037 0556 Elin 0216 0037 0556 0105 0548 0361 0163 0009 Elite 0218 0037 0556 Elta 0009 0264 0216 Emco 0247 Emerson 0714 0178 0247 0037 0556 0371 0070 0282 0361...
Page 130 Appendix 0370 Europa 0037 0556 Europhon 0037 0516 0163 0556 0247 0216 Evesham 1248 Excel 0037 0556 Expert 0163 Exquisit 0037 0556 0247 Fagor 0037 0556 FairTec 1191 FamilyLife 0037 0556 Fast 1901 Fenner 0374 0009 Ferguson 0073 0625 0287 0335 0193 0109...
Page 131 Appendix 0455 0264 Force 1149 Forgestone 0193 Formenti 0163 0037 0556 0486 0216 Formenti-Phoenix 0216 Fortress 0093 Fraba 0037 0556 0370 Friac 0009 0037 0556 0370 0499 0610 Frontech 0247 0264 0363 0009 0163 Fujimaro 0865 Fujitsu 0163 0009 0352 0037 0556 0361...
Page 132 Appendix Genesis 0009 0037 0556 Genexxa 0218 0037 0556 0412 0163 0009 Gericom 0865 1298 1217 0880 Goldfunk 0668 Goldhand 0216 GoldStar 0037 0009 0370 0001 0377 0178 0247 0216 0556 0163 0361 0109 0363 0606 0714 0715 0455 Gooding 0487 Goodmans 0634...
Page 133 Appendix 0070 0487 0037 0443 0706 0556 0587 0009 0036 0370 1935 1908 1308 0178 1376 0343 Grunkel 1163 H&B 0808 Haaz 0706 Haier 0698 0264 Halifax 0264 0216 Hammerstein 0264 Hampton 0216 Hanimex 0218 1908 Hanseatic 0037 0556 0499 0519 0163 0361...
Page 134 Appendix 1908 0714 HISense 1363 0208 Hitachi 0225 1225 0578 0036 0108 0473 0163 0343 0516 0481 0499 0037 0556 0109 0363 0548 0719 0634 0744 0178 1137 0105 0492 1481 0361 0512 0480 1037 1576 1149 HitachiFujian 0108 0225 Hitsu 0009 0610...
Page 135 Appendix 0418 0247 Indiana 0037 0556 InFocus 1164 Ingelen 0487 0610 0714 0163 0361 Ingersoll 0009 InnoHit 0009 0037 0556 0218 0516 0247 0282 1163 Innovation 0519 0037 0556 Innowert 0865 1298 inotech 0773 0820 Interactive 0037 0556 0512 0327 0163 0361 0370...
Page 136 Appendix 0480 0346 0208 0339 0606 0610 0631 0363 0264 0037 0556 0247 0374 1982 Jean 0036 0035 0037 0499 0634 0374 0556 0443 1908 Jocel 0712 Jubilee 0556 0653 0036 0193 0371 0218 0606 0418 0093 0650 Kaisui 0218 0282 0037 0556...
Page 137 Appendix 0037 0370 0610 0411 Kneissel 0374 0499 0556 0435 0362 1908 Kobra 1467 Kolster 0037 0556 0247 0218 Konichi 0009 Konka 0037 0556 0371 0714 0418 0218 0641 0587 0754 0894 Kontakt 0487 Korpel 0037 0556 Korting 0370 Kosmos 0037 0556 Kotron...
Page 138 Appendix 0109 0698 0715 1637 1191 1423 1305 0247 0361 Liesenk&Tter 0327 0037 0556 Liesenkotter 0037 0327 0328 0556 Lifetec 0037 0009 0519 0374 0668 0512 1037 1137 0556 0218 0264 1248 0714 Lloyd's 0001 0009 Lodos 1037 1149 Loewe 0512 0633 0790...
Page 139 Appendix 0037 0556 0668 1037 Manhattan 1267 0163 0778 Marantz 0037 0556 0412 Mark 0037 0556 0216 0374 0009 0714 0715 Master's 0499 0037 Masuda 0218 0371 0009 0264 0037 0556 Matsui 0037 0556 0487 0009 0011 0355 0036 0371 0433 0443 0363...
Page 140 Appendix Mercury 0001 0037 0009 0556 Merritt 0548 0361 0163 Metz 0388 0447 0746 0367 1163 0195 0535 0191 0037 0556 0587 0668 1037 1533 0178 0037 0556 0218 Micromaxx 0037 0556 0668 1037 0808 Microstar 0808 MicroTEK 0820 Mikomi 1149 Minato 0037...
Page 141 Appendix Musikland 0037 0218 0247 0556 MyCom 1376 0178 Myryad 0556 0037 0178 0361 0163 Naiko 0037 1982 0606 0556 Nakimura 0374 0037 0556 Naonis 0363 0163 Narita 1982 0226 National 0226 0170 0587 1170 1270 0036 0455 0009 0374 0037 0556 0011...
Page 142 Appendix 0610 0109 Nordmende 0109 0714 0891 0287 0560 0343 0195 0037 0556 0335 0163 1259 Norfolk 0163 Normerel 0037 0556 Novak 0037 0556 Novatronic 0037 0105 0374 0556 NU-TEC 0455 0698 Nurnberg 0163 0361 Oceanic 0163 0361 0208 0473 0548 0480 Odeon...
Page 143 Appendix 1505 0036 0093 0512 OttoVersand 0037 0556 0535 0195 0191 0361 0109 0226 0247 0009 0282 0343 0516 0519 Pace 1908 Pacific 0037 0556 1137 0714 1037 0443 Pael 0216 Palladium 0370 0037 0411 0714 1137 0191 1505 0200 0418 0556 0247...
Page 144 Appendix 0343 0374 0361 0009 0200 1756 Phocus 1289 1308 0714 Phoenix 0037 0556 0370 0486 0163 0216 Phonola 0037 0556 0193 0216 Pilot 0556 0037 0712 0706 Pioneer 0760 0011 0037 0170 0556 1260 0370 0343 0361 0109 0163 0287 0486 0512...
Page 145 Appendix 0163 0486 1037 Proton 0178 Provision 0499 0037 0556 1037 0714 PVision 1191 0037 0556 0374 0412 Pymi 0009 Quadral 0218 Quasar 0247 0650 0865 0009 Quelle 0037 1505 0011 0109 0512 0535 0191 0361 0036 0247 0074 0327 0084 0328 0070...
Page 146 Appendix Relisys 0865 0877 1207 1298 Reoc 0714 0634 1909 Revox 0037 0556 0370 0363 0411 0247 0163 0264 0370 0264 0037 0556 0486 Rhapsody 0216 Ricoh 0037 0556 Rinex 0773 0418 Roadstar 1037 0009 0418 0037 0556 0714 0668 0218 0264 0282...
Page 147 Appendix 0556 1249 0093 1235 0009 0370 0264 0216 0208 0519 0163 0625 Sandra 0216 Sansui 0037 0729 0556 0706 0371 0602 0455 0861 0753 Santon 0009 Sanyo 0208 1208 0036 0011 0370 0339 0216 0009 0163 0037 0108 0556 0486 0170 Save...
Page 148 Appendix 0363 0362 0163 0411 Seleco 0371 0036 0264 0346 0435 Sencora 0009 Sentra 0035 0218 0009 Serino 0610 0455 0216 0093 Sharp 0093 1193 0036 0653 0193 0516 0200 0760 1393 1163 Shintoshi 0037 0556 Shivaki 0037 0556 0443 0374 0178 Show...
Page 149 Appendix Smaragd 0487 Soemtron 0865 1298 Solavox 0361 0163 0548 0037 0556 Sonawa 0218 Soniko 0037 0556 Soniq 1467 Sonitron 0208 0370 0339 Sonneclair 0037 0556 Sonoko 0037 0556 0009 0264 0282 Sonolor 0208 0163 1505 0548 0361 0282 Sontec 0037 0556 0370...
Page 150 Appendix 0355 0455 0218 0610 Sunkai 0037 0556 0487 0865 Sunstar 0371 0037 0556 0009 0264 Sunwatt 0455 Sunwood 0037 0556 0009 Superla 0516 0216 Supersonic 0208 0556 0698 0264 0805 0455 SuperTech 0009 0037 0556 0216 0218 Supra 0178 0374 0009 Susumu...
Page 151 Appendix 0009 0247 0335 0037 0556 0361 0163 TechLine 0037 0556 0668 1437 1163 TechLux 1189 Techica 0218 Technica 1982 Technics 0650 TechniSat 0037 0556 0163 1267 Technisson 0714 1289 Technosonic 0037 0556 Techwood 1163 Tecnimagen 0556 Tedelex 0418 0606 1537 0009 0706...
Page 152 Appendix Teleview 0037 0556 Tempest 0009 0037 0556 0264 Tennessee 0037 0556 Tensai 0218 0037 0556 0009 0105 0374 0371 0377 0247 0715 0163 1037 Tenson 0009 Tesla 0037 Tevion 0519 0894 1259 1298 0037 1556 0556 0808 0648 0668 1137 0714 1037...
Page 153 Appendix 0718 0195 0191 0618 1908 0009 0698 0037 1164 1163 1935 1556 1265 0650 1704 Toyoda 0009 0371 0264 Trakton 0009 0264 TransContinens 0668 1037 0037 0556 0486 TRANScontinents 0865 Transonic 0037 0556 0455 0587 0512 0264 0698 0712 0418 0009 Transtec...
Page 154 Appendix 1149 0618 Univox 0037 0556 0163 Utax 0163 V7Videoseven 1755 0178 0880 1376 1217 Vestel 0037 0163 0556 0668 1037 1163 Vexa 0009 0037 0556 Victor 0653 Videologic 0218 0216 Videologique 0216 0218 Videosat 0247 VideoSystem 0037 0556 Videotechnic 0216 0374 Videoton...
Page 155 Appendix 0037 0861 0519 0896 Wharfedale 0556 1556 WhiteWestinghouse 0216 0037 0556 1909 Windsor 0668 1037 Windstar 0282 WindySam 0556 Wintel 0714 World-of-Vision 0880 0890 0865 1289 1298 0877 1217 Worldview 0455 X-View 1191 Xenius 0634 XLogic 0698 0860 Xoro 1196 1217 Xrypton...

This manual is also suitable for:

Premium

Azbox Elite User Manual

1 Introduction

2 Installations

3 Settings

4 Main Menu

5 Network

6 Product Specifications / Warranty

7 Appendix

Quick Links

User Manual

Related Manuals for Azbox Elite

Summary of Contents for Azbox Elite

This manual is also suitable for:

Table of Contents