2
Installations
cable. Plug one end of the cable into the S/PDIF socket on the digital
receiver, and plug the other end into the matching socket on your audio
system.
2.3 Installing batteries
To Install batteries in the remote control, perform the following steps:
1. Take off the battery cover from back of the remote control.
2. Install two AAA batteries, follow the instruction described in the
container and make sure the polarity(+ / -) direction is correct.
3. Put on the battery cover back.
NOTE
- Do not mix battery types. (Alkaline and Manganese)
- Do not short-circuit, heat, burn or disassemble batteries.
- Used batteries must not be disposed together with your household
waste. Please, inquire about the local regulations regarding disposal of
used batteries.
38
Need help?
Do you have a question about the Elite and is the answer not in the manual?
Questions and answers