Network; Connect The Digital Receiver To The Computer; Connect The Computer To The Digital Receiver - Azbox Elite User Manual

5

Network

5. Network
You can connect the digital receiver to the computer. Then you can copy
files to or play files through the network. Before you use the network,
the Settings > Internet menu must be set. When you use a Wi-Fi, you
should know whether you have a good connection. While the receiver is
in stand-by mode, the network runs by itself.

5.1 Connect the digital receiver to the computer

To connect the digital receiver to the computer, take the following steps:
1. Select the Settings > Storage menu.
2. Input the Workgroup, Server, Account and Password option; (if you
need password) with the Number buttons on the remote control. See
§ 4.2.1 for how to use the on-screen keyboard.
3. Move the cursor to Setup and press the OK(
complete message is received, select Execute with the OK(
4. Open "My Network" of your computer, then you can see the folder
that you already named in step 2.
NOTE
Do not stop the File server active condition while you use the network to
send or receive data.

5.2 Connect the computer to the digital receiver.

To connect the computer to the digital receiver, take the following steps:
) button. After the
) button.
113