Adjusting The Speaker Volume; Setting Gamma - Princeton SENergy 714 Reference Manual

Adjusting the screen display and speaker volume

Adjusting the speaker volume

1. Without the OSD Menu being displayed, press
the or the button.
2. Check that [VOLUME] is selected.
If it is not selected, press the
and select [VOLUME].
VOLUME
BACKLIGHT
3. Adjust by pressing the
button (lighter).
Note：
- On Screen display for adjustment disappears
several seconds after the last operation.
/ MODE button
31
31
SELECT /MODE
button (darker) or

Setting GAMMA

Color tone or brightness can be changed with one
Command.
GAMMA1
Displays image with the color tone results from
original scheme of liquid crystal panel.
GAMMA2
Display brightness is lowered. The brightness is
set to a level that is easier on the eyes than with
other modes and saves power.
GAMMA3
GAMMA3 color conversion, account of liquid
crystal's characteristics and represents color tone
close to its original image.
GAMMA4
Displays an image with dynamic and GAMMA4
primary colors.
How to set
Press the / Mode button when the OSD Menu is
not displayed.
Each time the button is pressed the next menu item
appears. (GAMMA1 GAMMA2 GAMMA3
GAMMA4 GAMMA1)
On Screen display for adjustment for adjustment
disappears several seconds after the last operation.
9