Reset Functions; Special Functions - Chauvet Lrgrnd 300E Beam User Manual

Operation

Reset Functions

Pan/Tilt Reset
Shutter/Dimmer Reset
Color/CMY Reset
Gobo Reset
Prism/Frost Reset
Reset All

Special Functions

Fixture Maintenance
Timers
Fixture Defaulting
-16-
Continued from previous page
From the Main Menu, highlight Reset and press <ENTER> (a new menu with the resettable
attributes will open).
You can leave this sub-menu at any time by pressing <MENU>.
1) Highlight Pan/Tilt and press <ENTER> (a pop up window will open).
a) Select YES to reset the pan and tilt movements to their home positions.
b) Accept the selected option.
1) Highlight Shutter/Dimmer and press <ENTER> (a pop up window will open).
a) Select YES to reset the shutter and dimmer to their home positions.
b) Accept the selected option.
1) Highlight Color/CMY and press <ENTER> (a pop up window will open).
a) Select YES to reset the color wheel and the CMY filters to their home positions.
b) Accept the selected option.
1) Highlight Gobo and press <ENTER> (a pop up window will open).
a) Select YES to reset the gobo wheel to its home position.
b) Accept the selected option.
1) Highlight Prism/Frost and press <ENTER> (a pop up window will open).
a) Select YES to reset the prism and the frost to their home positions.
b) Accept the selected option.
1) Highlight All and press <ENTER> (a pop up window will open).
a) Select YES to reset all moving optical parts and the moving head to their home
positions.
b) Accept the selected option.
From the Main Menu, highlight Special Functions and press <ENTER> (a new menu with
the special functions will open).
1) Highlight Fixture Maintenance and press <ENTER> (the current maintenance
interval and remaining time will show).
2) To change the maintenance interval timer, highlight Interval and press <ENTER> (a
pop up window will open).
a) Select the new interval (in hours).
b) Accept the new value.
3) To reset the remaining time counter, highlight Remain Time and press <ENTER> (a
pop up window will open).
a) Select Reset Time to reset the timer or Exit to exit without resetting it.
b) Accept the selected option.
It is a good idea to use the Fixture Maintenance Time as a reminder to change the
lamp.
1) Highlight Factory Setting and press <ENTER> (a pop up window will open).
a) Select YES to default the fixture to factory settings, or NO to exit without
resetting.
b) Accept the selected option and wait for the fixture to reset.
c) Return to the previous menu.
Legend 300E Beam User Manual Rev. 01f