Advertisement
SET-Up aND USagE
q attaching the Foot platforms
1
Remove black plastic protector
at the end of the frame. Using two
5mm hexagonal wrenches, remove
the two hexagonal bolts and the
two coupling bolts from the frame.
4a
If necessary, use a mallet /
hammer to tap the two coupling
bolts until they are all the way
through the platforms.
2
Remove black plastic protector
at the end of the platform. Position
the right and left foot platforms up
to the frame and align holes.
4b
The platforms should now be
snug against the frame.
3
Insert the two coupling bolts
and two hexagonal bolts. Starting
underneath with the bolt on the
back. Turn product over and insert
the next set of bolts. Tighten with
two 5mm hexagonal wrenches.
3
Advertisement
