Advertisement
BEFORE yOU BEgiN
Remove contents from box. Remove the foam separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches in the paint, dents that may have occurred during shipping. Because
the Carvr was assembled and packed at the factory, there should not be any problems, even if the box has a few
scars or dents.
SET-Up AND USAgE
1
Pull up on the folding release
lever to rotate the front fork into
the upright position.
4
Once you have reached the
desired height, close the up clamp.
Note: You may need to adjust the
thumb screw to ensure the clamp
is tight.
q Required Tools (not included)
5mm
hexagonal key wrenches
(not included)
Need Help? Visit our web site for replacement parts, product support, live chat and a list of
authorized service centers at www.razor.com or call toll-free at 866-467-2967 Monday - Friday
8:00 AM - 5:00 PM Pacific Time.
2
Insert handlebars into T-tube
until you hear the button click
into the hole. To release the
handlebar, press in button and
pull out.
3
To adjust the height of the
handlebar, release the up clamp
and pull up on the T-tube.
2
WARNiNg: DO
NOT USE NON-RAZOR
PRODUCTS WITH YOUR
CARVR.
The Carvr has been built to certain
Razor design specifications. The
original equipment supplied at the
time of sale was selected on the
basis of its compatibility with the
frame, fork and all other parts.
Certain aftermarket products may
or may not be compatible.
Advertisement
